Please select Into the mobile phone version | Continue to access the computer ver.
Assistant 2 does not connect to N3
583 3 2-11 04:21
Uploading and Loding Picture ...(0/1)
o(^-^)o
Song
lvl.1
South Korea
Offline

N3-AG has been used for my multicopter for one year.
Assistant 2 suddenly can not connect to N3-AG FC.
Assistant 2 autopilot was installed and reinstalled several times.
Changed USB port tens of several times, and also USB cables.

Windows 10 pc is used. The USB driver seems to work correctly according to the Device Manager: No yellow exclamation amrk at all.
It is linked as USB com5 port.


PLS inform me a solution.
2-11 04:21
Use props
Skyline-UAV
lvl.1
Flight distance : 7500 ft
United Kingdom
Offline

This could be win10 using driver en-forcement on un-signed drivers, Check driver properties to verify it is the Dji driver not a generic windows one.

If it is a generic then, hold shift key and restart windows to troubleshoot menu.
Select advanced options then opt to disable enforcer mode for signatures
Reboot and confirm choice.
Re install dji driver.

Hope this helps
2-11 11:05
Use props
Song
lvl.1
South Korea
Offline

Thank you for your help!
I already made a success to get the assistant program connected to N3-AG.
2-12 02:59
Use props
djiuser_JPNKaXPpjo9K
lvl.1

Indonesia
Offline

Song Posted at 2-12 02:59
Thank you for your help!
I already made a success to get the assistant program connected to N3-AG.

Your's led module blink before you connect to pc?
6-15 11:37
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules