Please select Into the mobile phone version | Continue to access the computer ver.
Constant Wobble in Underslung Mode
776 15 2-11 16:11
Uploading and Loding Picture ...(0/1)
o(^-^)o
Art in Flight
lvl.2
Canada
Offline

I've balanced the Ronin-S with Nikon D750. Ran auto-tune. Checked balance in the app and all axis are showing "Excellent". When shooting in underslung mode there is a constant and severe wobble from the roll motor rendering the Ronin-S unsuable which is a MAJOR problem for me.. please help.
2-11 16:11
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
Offline

Hi there, may I verify how did you enter the Underslung Mode?
There are two ways to enter the Underslung Mode: 1. Press and hold the front Trigger until the Ronin-S is upside down. 2. Pause the motors by double tapping the Power Button, hold the Ronin-S upside down, rotate the Roll axis to ensure the camera is in the upright position, the double tap the Power Button to re-engage the motor.
2-13 02:28
Use props
Art in Flight
lvl.2
Canada
Offline

I enter Underslung Mode by pausing the motors, tilting the gimbal, checking balance and re-engaging the motors. This happened to me again today on shoot with a GH5. It isn't as severe as with the D750 but it's noticeable in the footage and I could have done a better job with a mechanical gimbal..
2-15 20:55
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
Offline

Art in Flight Posted at 2-15 20:55
I enter Underslung Mode by pausing the motors, tilting the gimbal, checking balance and re-engaging the motors. This happened to me again today on shoot with a GH5. It isn't as severe as with the D750 but it's noticeable in the footage and I could have done a better job with a mechanical gimbal..

Any chance to provide us with a short sample video of the wobble roll axis?
2-18 22:34
Use props
fans8db587b2
New
United States
Offline

DJI Mindy Posted at 2-18 22:34
Any chance to provide us with a short sample video of the wobble roll axis?

Hi Mindy, I have this issue too using the A7III with a tamron 28-75 on an arca swiss plate in underslung.

balance, is excellent... autotuned for mid and high with no luck.
5-24 09:14
Use props
djiuser_DhpxJ98wxRhU
lvl.2

Philippines
Offline

Up to this day, under slang microjitter is still happening in my Dji Ronin S. What should I do?

I'm using A6500 with 18-105.
5-26 01:52
Use props
Art in Flight
lvl.2
Canada
Offline

DJI Mindy Posted at 2-18 22:34
Any chance to provide us with a short sample video of the wobble roll axis?

Mindy,

This issue is still happening, as bad as ever. I really hope you have a solution for this as it's really not usable like this.
I balanced it on it's stand then flipped it upsidedown with the motors off, re-balanced it then powered it on with it held upsidedown to enter underslung mode.

Here's a video of the problem:

Thank you
6-5 12:39
Use props
DJI Calam
lvl.2

Philippines
Offline

Art in Flight Posted at 6-5 12:39
Mindy,

This issue is still happening, as bad as ever. I really hope you have a solution for this as it's really not usable like this.

Same as mine..

6-5 19:43
Use props
DJI Calam
lvl.2

Philippines
Offline

Art in Flight Posted at 6-5 12:39
Mindy,

This issue is still happening, as bad as ever. I really hope you have a solution for this as it's really not usable like this.

Same as mine..

6-5 19:43
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
Offline

Art in Flight Posted at 6-5 12:39
Mindy,

This issue is still happening, as bad as ever. I really hope you have a solution for this as it's really not usable like this.

Hi, noted with thanks, I will provide the video to our engineers for the check, if there is any update, I'll let you know at the first time.
6-6 01:08
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
Offline

DJI Calam Posted at 6-5 19:43
Same as mine..

https://www.youtube.com/watch?v=4d_my6FqZmE

Hi, thanks for the video, I'll confirm it with our engineers , if there is an update in the future, I'll let you know at the first time.
6-6 01:10
Use props
Art in Flight
lvl.2
Canada
Offline

Here are a lot more people experiencing the same or similar problem. Would really like to see this get solved or I will be forced to abandon my Ronin S for another, more steady gimbal.

https://forum.dji.com/forum.php?mod=viewthread&tid=174233

https://forum.dji.com/thread-162200-1-1.html
6-6 07:56
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
Offline

Art in Flight Posted at 6-5 12:39
Mindy,

This issue is still happening, as bad as ever. I really hope you have a solution for this as it's really not usable like this.

Hi,you are recommended to increase the motor force value of the pan axis, or just use it upside down as the picture below shows.
6-7 00:00
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
Offline

DJI Calam Posted at 6-5 19:43
Same as mine..

https://www.youtube.com/watch?v=4d_my6FqZmE

Hi, please refer to the answer on the 13# floor.
6-7 00:03
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
Offline

Art in Flight Posted at 6-6 07:56
Here are a lot more people experiencing the same or similar problem. Would really like to see this get solved or I will be forced to abandon my Ronin S for another, more steady gimbal.

https://forum.dji.com/forum.php?mod=viewthread&tid=174233

Hi, please refer to the answer on the 13# floor.
6-7 00:03
Use props
DJI Calam
lvl.2

Philippines
Offline

DJI Mindy Posted at 6-7 00:03
Hi, please refer to the answer on the 13# floor.
I already did make my strength increase by 11 I think since my setup is just A6500.
Also I'm increasing the stiffness.

You think I should increase it more? or decrease it since I'm using a lightweight setup.

Anyways thank you for noticing my concern cause I've been waiting for ages on someone to notice my concerns.
6-7 04:26
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules