EdisonW1979
First Officer
Flight distance : 1535679 ft
Canada
Offline
|
Hi hgeurtsen,
I know what you mean, the stop and go motion between waypoints was infuriating me to say the least, but I finally found a way to make it work, at least somewhat...
First off, you MUST use Arc mode for this to work; I haven't been able to get it to work in polyline mode thus far... Even though you set the mission to Arc mode, those arcs actually won't occur until you actually specify the curvature between waypoints, for each waypoint!
Once you've setup a few waypoints, tap on waypoint #2 in your series; you'll notice on the bottom-right of the option toggles for that WP that at the far end, there is a function called Curvature, or something along those lines (need more coffee...). Tap on that, and then anywhere on the screen, scroll up with your finger to increase the flight curvature coming into, and out of, that waypoint. This will allow the M2 continuous, uninterrupted flight in and out of that waypoint. You'll have to repeat this for EVERY waypoint in your mission!
As for the jerky motion, that seems to be a bug in the drone FW, as even using Litchi can generate those jerky motions, so we'll have to wait for DJI to correct that.
Good luck! |
|