JorgeFIN
lvl.2
Flight distance : 836188 ft
Finland
Offline
|
I think RE goggles is a poor product. I buyed it for Mavic2 flying but also 5.8ghz analog video.
Observations:
- disclaimer, if new firmware at writing I don't have it. But I have larest firmware of upgraded jan 2019
- signal reception is very poor, with dji antennas I get 20-30m distance at best!
- no signal debug information except video noise
- I don't have other analog fpv glass for comparison but it cannot bbe this poor as ppl fly fov hundreds of meters away
- vtx tbs unify pro race, tried 25mW and 200mW modes. Also multiple frequencies tested.
- sma adapter fir 2nd padoga antenba to drone. It won't tension to dji antenna for proper contact and to lock down antenna. Sanding the adapter helped a bit, but cannot be sure that antenna connects properly, ref signal problems. Rhcp padoga on vtx I think has betrer range than dual dji antennas
- pal mode camera, goggles display it fine but analog sd card recorder records it wrong. It cuts at 480 lines and overlays rest pal resolution lines from top.
- goggles own player displays the same top-overlayed video.
- recorder fps on recorder video file probably wrong with pal recording. Cannot sync to betaflight blackbox file.
I feel very disappointed. Instead of buying re goggles I could have invested proven 5g8 analog goggles from market leader.
Is there anything I can do or debug?
And, goggles re works properly with Mavic2 digital link. Analog is the problem. Also hdmi display as pc simulator display is fine. So glasses seem to work as normal.
|
|