Please select Into the mobile phone version | Continue to access the computer ver.
Osmo, no video, no wifi connection, unable to firmware update FIX
243 4 3-13 19:42
Uploading and Loding Picture ...(0/1)
o(^-^)o
HarryThorn
lvl.1

United States
Offline

  
If there is no video, camera status is yellow, and no wifi connection and unable to update the firmware, do this:

1-The lens flex cable connection is loose. Disassemble the camera and re -connect the micro connector.
2-Handle wifi module flex cable is torn due to poor installation at the factory. Either change the module with new flex cable or use soldering station and magnifier to re solder the copper lines. Mine had 3 broken lines that I was able to reconnect them.

Now, I have video and successfully updated the firmware.
  
3-13 19:42
Use props
HarryThorn
lvl.1

United States
Offline

3-13 20:00
Use props
HarryThorn
lvl.1

United States
Offline

3-13 20:03
Use props
DJI Gamora
Super Moderator

Online

Hi there, thank you for sharing these tips for fixing the unit. However, please be mind by doing this it may void the warranty if your unit still under the warranty. Though, we really appreciate you for sharing. Best regards!
3-14 09:04
Use props
HarryThorn
lvl.1

United States
Offline

Sure. My suggestion is for out of warranty  parts. So many people asking for help on this issue.  I just wanted to share my success story..
Best, Harry
3-15 09:42
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules