nilanjan118
First Officer
Flight distance : 636663 ft
Japan
Offline
|
Are you sure your RC is connected to the AC?
Please note that the RC and AC should be paired, indicated by the red LED of the RC turning green and your mobile device should be connected to your RC by either WiFi or an OTG cable. By the looks of it, it seems you have your mobile device connected directly to your AC via WiFi. And I assume you are using the take-off icon on the app. So the AC is simply hovering after take-off but has no response to RC inputs.
If my guess above is correct, you need to do this.
1. Turn on remote & Spark.
2. Press and hold button on Spark's battery for about 3 secs until you hear a beep. The front LEDs on the Spark should be red and blinking.
3. Press and hold the pause, Fn, and Control button on the remote. It will start beeping. When it manages to pair itself to the Spark, the front LEDs will be green and the small LED on the remote will also be green.
Once you have paired the RC and Spark, connect your phone to the RC via WiFi.
The WiFi SSID will be something like Spark-RCxxxxxx and the password will be 12341234 by default.
Now launch DJIGo4 app. Take-off like you have done before and see if the RC is working.
Have a safe flight. Cheers. |
|