muflone
lvl.1
Flight distance : 613120 ft
Italy
Offline
|
Hello, I am having tons of problems with my new DJI Smart Controller, I have not yet been able to use it.
Linking does not work, whenever I press the linking button, the linking procedure is never initiated. The Linking button never becomes blue (as I have seen in the manual and in reviews on Youtube). Using the buttons combination (C1 + C2 + record button) as suggested by the manual does not work.
I am unable to update the firmware to the latest V1.00.0400 version. I have tried it atleast 50 times by now, but it's impossible to update from the contorller or using DJI Assistant 2.
The update always fails at 15% when installing, it downloads fine. I have a perfectly working internet connection (1 gigabit up and down), and the Controller has always been above 90% battery when trying to install. I am using the original USB-C cable included, and I have also tried with different cables.
I'm running the firmware V1.00.0284 as the controller says.
I have done a factory reset on the controller atleast 10 times by now, and reinstalled DJI Assistant 2 on both a Mac and a PC.
Any chance this could be fixed? Any other way to update the firmware?
|
|