I know the normal kill switch is both sticks down and inward however
the motorts keep cutting off when i pull the left stick down.
Any ideas why this is happening.Thanks

Hi there, thank you for reaching out. Actually, this is normal since we have a different type of Combination Stick Command. You may check this screenshot for reference. Best regards!

DJI Gamora Posted at 3-22 11:06
Hi there, thank you for reaching out. Actually, this is normal since we have a different type of Combination Stick Command. You may check this screenshot for reference. Best regards!
[view_image]

Yes saw this before with a friend.  Bought the drone used, but had a weird controller stick configuration.  Just really glad we found out while on the ground and not twenty feet up.

Lonesome Crow Posted at 4-1 15:30
Yes saw this before with a friend.  Bought the drone used, but had a weird controller stick configuration.  Just really glad we found out while on the ground and not twenty feet up.

Left stick down shut off won't happen when the bird is air born.  Only when then sensors register no descent or altitude change.

Lonesome Crow Posted at 4-1 15:30
Yes saw this before with a friend.  Bought the drone used, but had a weird controller stick configuration.  Just really glad we found out while on the ground and not twenty feet up.

Thank you for the additional information. If you have any other concern you feel free to post here in the forum and we are happy to assist you. Have a great day!