Please select Into the mobile phone version | Continue to access the computer ver.
Firmware release notes 01.04.88.01
1176 6 2019-4-2
Uploading and Loding Picture ...(0/1)
o(^-^)o
Keego63
Second Officer
Flight distance : 9117 ft
Australia
Offline

Here are the Official Ryze release notes, it does not really explain what has been done to improve flight performance.
Maybe Ryze can help us here and explain what the changes are?
https://dl-cdn.ryzerobotics.com/downloads/Tello/20190328/Tello_Release_Notes_en.pdf?fbclid=IwAR0EyXsogdTcNSekvTcOMlPzfkCKY1Ys9cXzdg1_NEgoBCeN0IfDdmzXfNk

Tello_Release_Notes_en.pdf

58.89 KB, Down times: 7

2019-4-2
Use props
RYZE
Super Moderator

China
Offline

Appreciate your update here. It is the flight controlled system which is Optimized to improve the stability of the drone.
2019-4-2
Use props
Cepheroh
Second Officer
Flight distance : 1691959 ft

Singapore
Offline

Good Job Ryze
2019-4-2
Use props
jacksonnai
Captain
Malaysia
Offline

Thanks for sharing!
2019-4-3
Use props
maddox
Captain
Malaysia
Offline

Thanks for the update!
2019-4-6
Use props
Phillip_Boucher
lvl.1
Flight distance : 416083 ft
Sweden
Offline

I have a defect which has occurred since a recent firmware update.
I have tried to update the firmware again today so now it is at the latest version.
I have also updated the app and this is at the latest version.
I have reset the drone while holding power button for 5 seconds.
I have recalibrated the IMU.
I have recalibrated the gravity.
I have tried another phone in case the phone is the problem all to no avail.
The problem only seems to occur when the drone is warm, OK when cold.
Please see the video in the attached link for evidence of failure mode.
The drone starts to rotate anti clockwise by itself even when hovering.
If control yaw is moved it stops, but most times it starts rotating again by itself again soon after.
Your help would be appreciated as this drone was fine before firmware update

I would add the video but this forum keeps telling me I do not have permission to add a URL
2019-4-6
Use props
RYZE
Super Moderator

China
Offline

Phillip_Boucher Posted at 4-6 08:27
I have a defect which has occurred since a recent firmware update.
I have tried to update the firmware again today so now it is at the latest version.
I have also updated the app and this is at the latest version.

Hi Phillip, hope you have enjoyed your day. Your detailed description and work put into it are appreciated. Could you kindly attach the link or video here for reference?  Thanks a lot in advance.
2019-4-6
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules