Please select Into the mobile phone version | Continue to access the computer ver.
No zoom option in DJI go app w/ Inspire1 and Z3 camera
870 7 2019-4-3
Uploading and Loding Picture ...(0/1)
o(^-^)o
TonyUAS
lvl.1
United States
Offline

Just purchased a new z3 camera and added it to the Inspire 1v2.  The camera will not focus and there is no option in the DJI Go app to zoom, nor does the zoom buttom combo work on the controller.  Inspire firmware is currently 1.11.01.50+.  Camera firmware is 1.9.1.40+.  Remote firmware is1.7.80.  Tried delete and reinstalling DJI go, recalibrating the remote.
2019-4-3
Use props
TruGreen
Captain
Flight distance : 518937 ft
  • >>>
United States
Offline

You need to download and install the Firmware for the Z3

https://www.dji.com/zenmuse-z3/i ... te_search#downloads
2019-4-3
Use props
TonyUAS
lvl.1
United States
Offline

TruGreen Posted at 4-3 09:08
You need to download and install the Firmware for the Z3

https://www.dji.com/zenmuse-z3/info?site=brandsite&from=insite_search#downloads

Tried grabbing Zenmuse Z3 Firmware V01.11.01.50 (Inspire 1) 2017-07-10.  This is the same number as the firmware I already have installed.  Regardless, I tried and the update failed.
2019-4-4
Use props
TruGreen
Captain
Flight distance : 518937 ft
  • >>>
United States
Offline

did you do it with the Z3 installed?
2019-4-4
Use props
TonyUAS
lvl.1
United States
Offline

TruGreen Posted at 4-4 05:44
did you do it with the Z3 installed?

Yes, the z3 was mounted at the time.
2019-4-4
Use props
TruGreen
Captain
Flight distance : 518937 ft
  • >>>
United States
Offline

TonyUAS Posted at 4-4 06:20
Yes, the z3 was mounted at the time.

best i can say is format the SD then transfer the FW file again and try to update once again and see. although it is the same number FW its slightly different from X3 and Z3
2019-4-4
Use props
TonyUAS
lvl.1
United States
Offline

Still stuck.  I've tried formatting a couple different SD cards on the computer and the AC(through DJI GO).  The AC acts as though its starting the upgrade then seems to get stuck making an unpleasant noise.
2019-4-5
Use props
Skinnertron
lvl.2
Flight distance : 994508 ft
United Kingdom
Offline

I also have similar problem - Z3 new - only working intermittently. Cannot install Z3 firmware 1.11.01.50.
AC already running 1.11.01.50 X3 so seems to disregard the Z3 1.11.01.50 .
In info, AC version actually states 1.11.01.50+

No option to install old FW version and try again as not on DJI Website?
2019-5-19
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules