Here is the instructions on how to perform the DJI Spark IMU calibration.

• To calibrate the DJI Spark, first place it on a flat surface.
• Power on the DJI Spark quadcopter.
• Open the DJI Go 4 app and connect to the Spark.
• Enter in the General Settings of the DJI Go 4 app (3 dots).
• Open the Main Controller settings (quadcopter icon).
• Scroll down and click on ‘Sensors’.
• Click on ‘Calibrate IMU’.
• Click on ‘Start’.
• Next, you will see ‘Calibrating, please wait’.
• Place the Spark in the various positions shown on screen.
• When lights change from blue to green, then you are shown the next position to put the Spark in.
• Stand the DJI Spark on it’s side with the front facing right, check for the green calibration light.
• Then stand the DJI Spark on it’s side with the front facing left, check for light to turn green.
• Stand the Spark on it’s nose (camera facing down) and wait for green calibration light.
• Next, stand the Spark quadcopter with it’s back end facing down and watch for the green calibration light.
• The last DJI Spark calibration position is to place the quadcopter upside down on the flat surface and wait for green light.
• This completes the DJI Spark Calibration with the message stating “IMU calibration complete. Please restart your aircraft”.
• Click OK and restart the quadcopter.
  

Hi PardzFilm, we do appreciate your interest in our products and thanks for sharing this informative post. You may also follow the video tutorial below on how to properly calibrate the IMU of your DJI Spark. Should you need further help, please feel free to contact us. Thanks for choosing DJI!

DJI Paladin Posted at 4-12 07:58
Hi PardzFilm, we do appreciate your interest in our products and thanks for sharing this informative post. You may also follow the video tutorial below on how to properly calibrate the IMU of your DJI Spark. Should you need further help, please feel free to contact us. Thanks for choosing DJI!

Thanks sir

DJI Paladin Posted at 4-12 07:58
Hi PardzFilm, we do appreciate your interest in our products and thanks for sharing this informative post. You may also follow the video tutorial below on how to properly calibrate the IMU of your DJI Spark. Should you need further help, please feel free to contact us. Thanks for choosing DJI!

Thanks sir,

PardzFilm Posted at 4-14 00:26
Thanks sir

You're most welcome. Cheers!

Thanks for sharing

Buenas noches, tengo un pequeño problema con mi drone spark ya que no he podido volarlo porque me dice que debo calibrar el IMU pero cuando lo estoy haciendo me arroja este mensaje. Error de orientación automática error -50. Alguien sabe cómo solucionarlo. Gracias  

DJI Paladin Posted at 4-12 07:58
Hi PardzFilm, we do appreciate your interest in our products and thanks for sharing this informative post. You may also follow the video tutorial below on how to properly calibrate the IMU of your DJI Spark. Should you need further help, please feel free to contact us. Thanks for choosing DJI!

Hey i have a spark that says gos disconnected it worked before an update and now jt doesnt work and i bought it second hand