My remote control phantom 4 pro not charge only 2 led on can help me please

Send it in to DJI repair.

Just to confirm initially that the charger is functioning correctly ?

So you cannot recharge the remote, but you can for example recharge a battery ?

I suppose the fact that by plugging in it lights two of the led's suggests there is power of some sort there.

Also, you have checked(the obvious)that the power lead into the transformer(power unit) is fully home etc and the leads are not damaged or partially home.

Do you have any friends that live nearby so you could try their charger or your charger on their kit ?

Any RC model shops near by to test your kit ?

Do you have a multimeter so you can test the output of the charger(if that's the issue) ?


* Sorry, just realised the original date of your issue, I only jumped on after the previous reply to mine. Great that it is sorted ! *

thanks for helping me, the problem was on the motherboard of the remote control, I wrote to dji and my experience was terrible, but another dealer fixed it.

ksqlsurf.com Posted at 4-6 03:47
Just to confirm initially that the charger is functioning correctly ?

So you cannot recharge the remote, but you can for example recharge a battery ?

thanks for helping me, the problem was on the motherboard of the remote control, I wrote to dji and my experience was terrible, but another dealer fixed it.

ksqlsurf.com Posted at 4-6 03:47
Just to confirm initially that the charger is functioning correctly ?

So you cannot recharge the remote, but you can for example recharge a battery ?

thanks for helping me, the problem was on the motherboard of the remote control, I wrote to dji and my experience was terrible, but another dealer fixed it.