Focus problem in Motion lapse
1268 13 2019-4-28
Uploading and Loding Picture ...(0/1)
o(^-^)o
Renato58
lvl.2
Flight distance : 209304 ft
Italy
Offline

I bought Dji Osmo Pocket in April 2019 and installed the last Firmware.
In Timelapse mode i create a path with an initial point and final point. Only in this mode the focus is not good and the Osmo Pocket produce bad images. I tried to change the type of focus, AFC and AFS but nothing, whem the OP begin the first shot, the focus change.
In Timelapse mode without a path it is all OK. The single shots of the camera is OK. In the video mode it is all OK. Only when i create a path i have this problem. It seems a firmware problem.  
2019-4-28
Use props
Tide
First Officer
South Korea
Offline



Is it V 01.06.00.20?
What was your shooting subject?
Daylight? Night? Indoors?
2019-4-28
Use props
Renato58
lvl.2
Flight distance : 209304 ft
Italy
Offline

Tide Posted at 4-28 04:44
https://youtu.be/fRMjEXlzPzc

Is it V 01.06.00.20?

Itis V 01.06.00.30?
The shooting subject is in Daylight and also Indoor?
I tried more times and always have the same result
2019-4-28
Use props
Tide
First Officer
South Korea
Offline

Renato58 Posted at 4-28 05:02
Itis V 01.06.00.30?
The shooting subject is in Daylight and also Indoor?
I tried more times and always have the same result

That is strange.
Daylight motion-lapse always had no problem.
The minimum focus distance for motion-lapse is 2m or 3m was in dji discription.

It would be helpful if you upload some sample video of out of focus shot you have.
2019-4-28
Use props
Renato58
lvl.2
Flight distance : 209304 ft
Italy
Offline

2019-4-28
Use props
Renato58
lvl.2
Flight distance : 209304 ft
Italy
Offline

2019-4-28
Use props
Renato58
lvl.2
Flight distance : 209304 ft
Italy
Offline

In the first Picture you can see the single shot in Motion Lapse with Path, in the second the shot in Time Lapse without Path.
The distance is over 4 meters but I saw this effect also in external view in three different Motion Lapse. Always there is this difference.
2019-4-28
Use props
Stuge234
lvl.3
India
Offline

I have the same issue along with many people .

DJI Support reply to above issue


"       
DJI Support

Dear customer,

Thank you for your patience.

Kindly refer below feedback from designation department:
The shortest distance between the device and object in Motionlapse is 2.5m, so please make the object far away from OSMO POCKET."



Firmware fix is all needed to fix the above problem..Only if DJI is ready to own up that it needs a fix .
2019-4-28
Use props
Stuge234
lvl.3
India
Offline

Renato58 Posted at 4-28 10:38
In the first Picture you can see the single shot in Motion Lapse with Path, in the second the shot in Time Lapse without Path.
The distance is over 4 meters but I saw this effect also in external view in three different Motion Lapse. Always there is this difference.
I have the same issue like mentioned by you .I would suggest you to get it exchanged if its new .I really want to use motion timelapse feature ,but unable to do so  . Might end up selling it if dji fails to solve the problem which needs firmware fix .


2019-4-28
Use props
Renato58
lvl.2
Flight distance : 209304 ft
Italy
Offline

2019-4-29
Use props
Renato58
lvl.2
Flight distance : 209304 ft
Italy
Offline

2019-4-29
Use props
Renato58
lvl.2
Flight distance : 209304 ft
Italy
Offline

In the two pictures it is possible to see the poor quality of the photos especially in the left side.
With a normal Time Lapse without PATH the quality instead is very good. The focus change when the Time Lapse with PATH begin with the first shot
2019-4-29
Use props
Renato58
lvl.2
Flight distance : 209304 ft
Italy
Offline

Stuge234 Posted at 4-28 14:07
I have the same issue like mentioned by you .I would suggest you to get it exchanged if its new .I really want to use motion timelapse feature ,but unable to do so  . Might end up selling it if dji fails to solve the problem which needs firmware fix .

I wrote to Dji assistance and sent the images, now I am waiting for the engineers reply
2019-5-1
Use props
Stuge234
lvl.3
India
Offline

Renato58 Posted at 5-1 01:01
I wrote to Dji assistance and sent the images, now I am waiting for the engineers reply

got any reply ?
2019-5-3
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules