Please select Into the mobile phone version | Continue to access the computer ver.
Inspire 1 Pro Connection Problems
801 8 2019-5-1
Uploading and Loding Picture ...(0/1)
o(^-^)o
Teoyaomqui
lvl.2
United States
Offline

Hello I just open a brand new Inspire 1 Pro, Charged all the batteries but do not get any connection with any of my devices.

I tried connecting the RC and opening the Go App to a Note 8 and it only charges the phone.

I tried it connecting the RC and opening the Go app on an iPad 2...nothing happend.

I connected the RC to my computer and used DJI Assistant 2 and it wont recognice the firmware.

I have updated the drone/camera to the current available firmware via SD card.  But cannot find a way to update the controller.

I have a second RC and everything is the same except that when I connect to DJI Assistant 2, nothing happends.

Light on RC blinks red and green, which for what I have read is a mismatch FW.

I can control the gimbal up and down and little movement left and right.

Any help will be apreciated.


_________________________________________________________________________________________________________
[00049824]========== 2015.10.21 18:20:42. boot(15) ============
[00049947]Packet [C:\WM610_FC550_FW_V01.00.00.30_1012.bin] detected, card sn [0xec120afb].
[00049981]Packet upgrade start...

[00050018]Packet checking...
[00050055]Packet vlink 01.00.0030 <-> 01.00.0030.
[00050124]Done.

[00050157]Version checking[1]...
[00050191][01 00][00] v0.34.3973 -> v0.34.3973
[00050225][01 01][00] v0.34.3973 -> v0.34.3973
[00050264][01 04][00] v0.1.3977 -> v0.1.3977
[00050333][04 00][00] v1.28.0.5 -> v1.28.0.5
[00050423][03 05][00] v34.1.0.5 -> v34.1.0.5
[00050487][03 06][00] v2.2.6.33 -> v2.3.1.1 need upgrade.
[00050563][05 00][00] v3.0.6.1 -> v3.0.6.1
[00050614][08 00][00] v2.14.9.17 -> v2.14.9.17
[00050657][09 00][00] v1.8.0.0 -> v1.8.0.0
[00050743][11 00][00] v3.7.15.10 -> v3.7.15.10
[00050822][12 00][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00050902][12 01][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00050982][12 02][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00051062][12 03][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00051901][15 00][00] v1.1.2.0 -> v1.1.2.0
[00051963][17 00][00] v1.1.0.4 -> v1.1.0.4
[00052063][17 01][00] v2.0.0.8 -> v2.0.0.8
[00052116][19 00][00] v1.0.8.96 -> v1.0.8.96
[00052150]Done.

[00054186]Waiting for user confirm...
[00064223]Timeout, start upgrade automatically.

[00064313]Firmware upgrading[1]...
[00064377][12 00] Firmware upgrade start...
[00120758][12 00] Firmware upgrade finished successfully.
[00120818][12 01] Firmware upgrade start...
[00177339][12 01] Firmware upgrade finished successfully.
[00177396][12 02] Firmware upgrade start...
[00233735][12 02] Firmware upgrade finished successfully.
[00233802][12 03] Firmware upgrade start...
[00290716][12 03] Firmware upgrade finished successfully.
[00290859][03 06] Firmware upgrade start...
[00532847][03 06] Firmware upgrade finished successfully.
[00532883]Done.

[00532918]Version checking[2]...
[00532958][01 00][00] v0.34.3973 -> v0.34.3973
[00532992][01 01][00] v0.34.3973 -> v0.34.3973
[00533117][01 04][00] v0.1.3977 -> v0.1.3977
[00533159][04 00][00] v1.28.0.5 -> v1.28.0.5
[00533212][03 05][00] v34.1.0.5 -> v34.1.0.5
[00533292][03 06][05] v2.3.1.1 -> v2.3.1.1
[00533371][05 00][00] v3.0.6.1 -> v3.0.6.1
[00533418][08 00][00] v2.14.9.17 -> v2.14.9.17
[00533471][09 00][00] v1.8.0.0 -> v1.8.0.0
[00533551][11 00][00] v3.7.15.10 -> v3.7.15.10
[00533631][12 00][05] v1.11.0.0 -> v1.11.0.0
[00533731][12 01][05] v1.11.0.0 -> v1.11.0.0
[00533831][12 02][05] v1.11.0.0 -> v1.11.0.0
[00533931][12 03][05] v1.11.0.0 -> v1.11.0.0
[00534045][15 00][00] v1.1.2.0 -> v1.1.2.0
[00534112][17 00][00] v1.1.0.4 -> v1.1.0.4
[00534212][17 01][00] v2.0.0.8 -> v2.0.0.8
[00534264][19 00][00] v1.0.8.96 -> v1.0.8.96
[00534317]Packet upgrade finish successfully.



[00022489]========== 2015.10.26 12:13:58. boot(15) ============
[00022522]Packet [C:\WM610_FC550_FW_V01.00.00.30_1012.bin] detected, card sn [0xbc183f0f].
[00022554]Packet upgrade start...

[00022597]Packet checking...
[00022629]Packet vlink 01.00.0030 <-> 01.00.0030.
[00022660]Record vlink 01.00.0030 <-> 01.00.0030 (flow = 0).
[00022695]Done.

[00022726]Version checking[1]...
[00022764][01 00][00] v0.34.3973 -> v0.34.3973
[00022795][01 01][00] v0.34.3973 -> v0.34.3973
[00022833][01 04][00] v0.1.3977 -> v0.1.3977
[00022883][04 00][00] v1.28.0.5 -> v1.28.0.5
[00022948][03 05][00] v34.1.0.5 -> v34.1.0.5
[00023008][03 06][00] v2.2.6.33 -> v2.3.1.1 need upgrade.
[00023068][05 00][00] v3.0.6.1 -> v3.0.6.1
[00023115][08 00][00] v2.14.9.17 -> v2.14.9.17
[00023158][09 00][00] v1.8.0.0 -> v1.8.0.0
[00023228][11 00][00] v3.7.15.10 -> v3.7.15.10
[00023349][12 00][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00023428][12 01][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00023508][12 02][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00023568][12 03][00] v1.10.0.0 -> v1.11.0.0 need upgrade.
[00024878][15 00][00] v1.1.2.0 -> v1.1.2.0
[00024928][17 00][00] v1.1.0.4 -> v1.1.0.4
[00025108][17 01][00] v2.0.0.8 -> v2.0.0.8
[00025153][19 00][00] v1.0.8.96 -> v1.0.8.96
[00025187]Done.

[00027219]Waiting for user confirm...
[00037257]Timeout, start upgrade automatically.

[00037346]Firmware upgrading[1]...
[00037387][12 00] Firmware upgrade start...
[00093404][12 00] Firmware upgrade finished successfully.
[00093447][12 01] Firmware upgrade start...
[00149102][12 01] Firmware upgrade finished successfully.
[00149146][12 02] Firmware upgrade start...
[00204905][12 02] Firmware upgrade finished successfully.
[00204958][12 03] Firmware upgrade start...
[00260759][12 03] Firmware upgrade finished successfully.
[00260869][03 06] Firmware upgrade start...
[00505992][03 06] Firmware upgrade finished successfully.
[00506022]Done.

[00506056]Version checking[2]...
[00506095][01 00][00] v0.34.3973 -> v0.34.3973
[00506131][01 01][00] v0.34.3973 -> v0.34.3973
[00506167][01 04][00] v0.1.3977 -> v0.1.3977
[00506207][04 00][00] v1.28.0.5 -> v1.28.0.5
[00506275][03 05][00] v34.1.0.5 -> v34.1.0.5
[00506355][03 06][05] v2.3.1.1 -> v2.3.1.1
[00506436][05 00][00] v3.0.6.1 -> v3.0.6.1
[00506486][08 00][00] v2.14.9.17 -> v2.14.9.17
[00506532][09 00][00] v1.8.0.0 -> v1.8.0.0
[00506615][11 00][00] v3.7.15.10 -> v3.7.15.10
[00506715][12 00][05] v1.11.0.0 -> v1.11.0.0
[00506815][12 01][05] v1.11.0.0 -> v1.11.0.0
[00506915][12 02][05] v1.11.0.0 -> v1.11.0.0
[00507015][12 03][05] v1.11.0.0 -> v1.11.0.0
[00507107][15 00][00] v1.1.2.0 -> v1.1.2.0
[00507155][17 00][00] v1.1.0.4 -> v1.1.0.4
[00507256][17 01][00] v2.0.0.8 -> v2.0.0.8
[00507327][19 00][00] v1.0.8.96 -> v1.0.8.96
[00507357]Packet upgrade finish successfully.



[00012672]========== remo-con disconnect. boot(15) ============
[00012707]Packet [C:\WM610_FC550_FW_V01.11.01.50.bin] detected, card sn [0xb1621756].
[00012742]Packet upgrade start...

[00012779]Packet checking...
[00012821]Packet vlink 01.11.0150 <-> 01.11.0150.
[00012856]Record vlink 01.00.0030 <-> 01.00.0030 (flow = 0).
[00012968]Done.

[00013011]Version checking[1]...
[00013056][04 00][00] v1.28.0.5 -> v1.31.1.67 need upgrade.
[00013109][08 00][00] v2.14.9.17 -> v2.14.9.42 need upgrade.
[00013152][01 00][00] v0.34.3973 -> v1.29.5379 need upgrade
[00013186][01 01][00] v0.34.3973 -> v1.29.5379 need upgrade
[00013227][01 04][00] v0.1.3977 -> v0.5.5085 need upgrade
[00013327][03 05][00] v34.1.0.5 -> v34.1.0.5
[00013407][03 06][00] v2.3.1.1 -> v2.4.20.50 need upgrade.
[00013467][05 00][00] v3.0.6.1 -> v3.0.6.2 need upgrade.
[00013518][09 00][00] v1.8.0.0 -> v5.0.0.0 need upgrade.
[00013567][11 00][00] v3.10.0.0 -> v3.9.0.0
[00013667][12 00][00] v1.11.0.0 -> v1.11.0.0
[00013767][12 01][00] v1.11.0.0 -> v1.11.0.0
[00013867][12 02][00] v1.11.0.0 -> v1.11.0.0
[00013967][12 03][00] v1.11.0.0 -> v1.11.0.0
[00015268][15 00][00] v1.1.2.0 -> v1.1.2.0
[00015327][17 00][00] v1.1.0.4 -> v1.1.0.8 need upgrade.
[00015447][17 01][00] v2.0.0.8 -> v2.0.1.6 need upgrade.
[00015511][19 00][00] v1.0.8.96 -> v1.0.8.96
[00015549]Done.

[00017585]Waiting for user confirm...
[00027623]Timeout, start upgrade automatically.

[00027702]Firmware upgrading[1]...
[00033684][01 00] Firmware upgrade start...
[00006378][01 00] Firmware upgrade finished successfully.
[00006417]Done.

[00006451]Packet [C:\WM610_FC550_FW_V01.11.01.50.bin] resumed, card sn [0xb1621756].
[00006499]Packet vlink 01.11.0150 <-> 01.11.0150.
[00006544]Record vlink 01.00.0030 <-> 01.00.0030 (flow = 0).
[00006579]Version checking[2]...
[00006623][04 00][00] v1.28.0.5 -> v1.31.1.67 need upgrade.
[00006672][08 00][00] v2.14.9.17 -> v2.14.9.42 need upgrade.
[00006715][01 00][05] v1.29.5379 -> v1.29.5379
[00006774][01 01][00] v0.34.3973 -> v1.29.5379 need upgrade
[00006828][01 04][00] v0.1.3977 -> v0.5.5085 need upgrade
[00006901][03 05][00] v34.1.0.5 -> v34.1.0.5
[00007021][03 06][00] v2.3.1.1 -> v2.4.20.50 need upgrade.
[00007101][05 00][00] v3.0.6.1 -> v3.0.6.2 need upgrade.
[00007173][09 00][00] v1.8.0.0 -> v5.0.0.0 need upgrade.
[00007342][11 00][00] v3.10.0.0 -> v3.9.0.0
[00007442][12 00][00] v1.11.0.0 -> v1.11.0.0
[00007542][12 01][00] v1.11.0.0 -> v1.11.0.0
[00007622][12 02][00] v1.11.0.0 -> v1.11.0.0
[00007722][12 03][00] v1.11.0.0 -> v1.11.0.0
[00009057][15 00][00] v1.1.2.0 -> v1.1.2.0
[00009121][17 00][00] v1.1.0.4 -> v1.1.0.8 need upgrade.
[00009242][17 01][00] v2.0.0.8 -> v2.0.1.6 need upgrade.
[00009292][19 00][00] v1.0.8.96 -> v1.0.8.96
[00009327]Done.

[00009371]Firmware upgrading[2]...
[00009456][01 01] Firmware upgrade start...
[00019722][01 01] Firmware upgrade finished successfully.
[00019774][01 04] Firmware upgrade start...
[00045101][01 04] Firmware upgrade finished successfully.
[00045745][08 00] Firmware upgrade start...
[00568167][08 00] Firmware upgrade finished successfully.
[00568324][03 06] Firmware upgrade start...
[00827236][03 06] Firmware upgrade finished successfully.
[00827294][17 00] Firmware upgrade start...
[00868701][17 00] Firmware upgrade finished successfully.
[00868749][17 01] Firmware upgrade start...
[00902696][17 01] Firmware upgrade finished successfully.
[00902750][05 00] Firmware upgrade start...
[00928234][05 00] Firmware upgrade finished successfully.
[00928296][09 00] Firmware upgrade start...
[00959711][09 00] Firmware upgrade finished successfully.
[00959783][04 00] Firmware upgrade start...
[01014721][04 00] Firmware upgrade finished successfully.
[01014757]Done.

[01014792]Version checking[3]...
[01014834][04 00][05] v1.31.1.67 -> v1.31.1.67
[01014881][08 00][05] v2.14.9.42 -> v2.14.9.42
[01014921][01 00][05] v1.29.5379 -> v1.29.5379
[01014961][01 01][05] v1.29.5379 -> v1.29.5379
[01015015][01 04][05] v0.5.5085 -> v0.5.5085
[01015087][03 05][00] v34.1.0.5 -> v34.1.0.5
[01015147][03 06][05] v2.4.20.50 -> v2.4.20.50
[01015227][05 00][05] v3.0.6.2 -> v3.0.6.2
[01015282][09 00][05] v5.0.0.0 -> v5.0.0.0
[01015347][11 00][00] v3.10.0.0 -> v3.9.0.0
[01015447][12 00][00] v1.11.0.0 -> v1.11.0.0
[01015627][12 01][00] v1.11.0.0 -> v1.11.0.0
[01015710][12 02][00] v1.11.0.0 -> v1.11.0.0
[01015810][12 03][00] v1.11.0.0 -> v1.11.0.0
[01015936][15 00][00] v1.1.2.0 -> v1.1.2.0
[01016011][17 00][05] v1.1.0.8 -> v1.1.0.8
[01016114][17 01][05] v2.0.1.6 -> v2.0.1.6
[01016183][19 00][00] v1.0.8.96 -> v1.0.8.96
[01016222]Packet upgrade finish successfully.



[00006565]========== remo-con disconnect. boot(15) ============
[00006605]Packet [C:\WM610_FC550_FW_V01.11.01.50.bin] detected, card sn [0xb1621756].
[00006641]Packet upgrade start...

[00006688]Packet checking...
[00006747]Packet vlink 01.11.0150 <-> 01.11.0150.
[00006791]Record vlink 01.11.0150 <-> 01.11.0150 (flow = 0).
[00006837]Done.

[00006875]Version checking[1]...
[00006917][04 00][00] v1.31.1.67 -> v1.31.1.67
[00006977][08 00][00] v2.14.9.42 -> v2.14.9.42
[00007016][01 00][00] v1.29.5379 -> v1.29.5379
[00007052][01 01][00] v1.29.5379 -> v1.29.5379
[00007097][01 04][00] v0.5.5085 -> v0.5.5085
[00007214][03 05][00] v34.1.0.5 -> v34.1.0.5
[00007294][03 06][00] v2.4.20.50 -> v2.4.20.50
[00007374][05 00][00] v3.0.6.2 -> v3.0.6.2
[00007423][09 00][00] v5.0.0.0 -> v5.0.0.0
[00007494][11 00][00] v3.10.0.0 -> v3.9.0.0
[00007575][12 00][00] v1.11.0.0 -> v1.11.0.0
[00007674][12 01][00] v1.11.0.0 -> v1.11.0.0
[00007754][12 02][00] v1.11.0.0 -> v1.11.0.0
[00007854][12 03][00] v1.11.0.0 -> v1.11.0.0
[00007979][15 00][00] v1.1.2.0 -> v1.1.2.0
[00008035][17 00][00] v1.1.0.8 -> v1.1.0.8
[00008141][17 01][00] v2.0.1.6 -> v2.0.1.6
[00008189][19 00][00] v1.0.8.96 -> v1.0.8.96
[00010227]Packet upgrade cancelled at version checking.



[00006554]========== remo-con disconnect. boot(15) ============
[00006597]Packet [C:\WM610_FC550_FW_V01.11.01.50.bin] detected, card sn [0xb1621756].
[00006640]Packet upgrade start...

[00006686]Packet checking...
[00006724]Packet vlink 01.11.0150 <-> 01.11.0150.
[00006768]Record vlink 01.11.0150 <-> 01.11.0150 (flow = 0).
[00006814]Done.

[00006974]Version checking[1]...
[00007026][04 00][00] v1.31.1.67 -> v1.31.1.67
[00007116][08 00][00] v2.14.9.42 -> v2.14.9.42
[00007160][01 00][00] v1.29.5379 -> v1.29.5379
[00007196][01 01][00] v1.29.5379 -> v1.29.5379
[00007244][01 04][00] v0.5.5085 -> v0.5.5085
[00007313][03 05][00] v34.1.0.5 -> v34.1.0.5
[00007393][03 06][00] v2.4.20.50 -> v2.4.20.50
[00007453][05 00][00] v3.0.6.2 -> v3.0.6.2
[00007502][09 00][00] v5.0.0.0 -> v5.0.0.0
[00007573][11 00][00] v3.10.0.0 -> v3.9.0.0
[00007673][12 00][00] v1.11.0.0 -> v1.11.0.0
[00007753][12 01][00] v1.11.0.0 -> v1.11.0.0
[00007833][12 02][00] v1.11.0.0 -> v1.11.0.0
[00007913][12 03][00] v1.11.0.0 -> v1.11.0.0
[00008052][15 00][00] v1.1.2.0 -> v1.1.2.0
[00008113][17 00][00] v1.1.0.8 -> v1.1.0.8
[00008233][17 01][00] v2.0.1.6 -> v2.0.1.6
[00008277][19 00][00] v1.0.8.96 -> v1.0.8.96
[00010315]Packet upgrade cancelled at version checking.



[00006682]========== remo-con disconnect. boot(15) ============
[00006730]Packet [C:\WM610_FC550_FW_V01.11.01.50.bin] detected, card sn [0xb1621756].
[00006786]Packet upgrade start...

[00006842]Packet checking...
[00006891]Packet vlink 01.11.0150 <-> 01.11.0150.
[00006939]Record vlink 01.11.0150 <-> 01.11.0150 (flow = 0).
[00006993]Done.

[00007054]Version checking[1]...
[00007136][04 00][00] v1.31.1.67 -> v1.31.1.67
[00007195][08 00][00] v2.14.9.42 -> v2.14.9.42
[00007241][01 00][00] v1.29.5379 -> v1.29.5379
[00007288][01 01][00] v1.29.5379 -> v1.29.5379
[00007337][01 04][00] v0.5.5085 -> v0.5.5085
[00007412][03 05][00] v34.1.0.5 -> v34.1.0.5
[00007513][03 06][00] v2.4.20.50 -> v2.4.20.50
[00007576][05 00][00] v3.0.6.2 -> v3.0.6.2
[00007628][09 00][00] v5.0.0.0 -> v5.0.0.0
[00007692][11 00][00] v3.10.0.0 -> v3.9.0.0
[00007776][12 00][00] v1.11.0.0 -> v1.11.0.0
[00007852][12 01][00] v1.11.0.0 -> v1.11.0.0
[00007937][12 02][00] v1.11.0.0 -> v1.11.0.0
[00008032][12 03][00] v1.11.0.0 -> v1.11.0.0
[00008204][15 00][00] v1.1.2.0 -> v1.1.2.0
[00008355][17 00][00] v1.1.0.8 -> v1.1.0.8
[00010953][17 01][00] v2.0.1.6 -> v2.0.1.6
[00011002][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013048]Packet upgrade cancelled at version checking.



[00006571]========== remo-con disconnect. boot(15) ============
[00006614]Packet [C:\WM610_FC550_FW_V01.11.01.50.bin] detected, card sn [0xb1621756].
[00006652]Packet upgrade start...

[00006700]Packet checking...
[00006759]Packet vlink 01.11.0150 <-> 01.11.0150.
[00006812]Record vlink 01.11.0150 <-> 01.11.0150 (flow = 0).
[00006858]Done.

[00006897]Version checking[1]...
[00006958]========== remo-con disconnect. boot(15) ============
[00006994]Packet [C:\WM610_FC550_FW_V01.11.01.50.bin] detected, card sn [0xb1621756].
[00007035]Packet upgrade start...

[00007080]Packet checking...
[00007126]Packet vlink 01.11.0150 <-> 01.11.0150.
[00007188]Record vlink 01.11.0150 <-> 01.11.0150 (flow = 0).
[00007231]Done.

[00007269]Version checking[1]...
[00007310][04 00][00] v1.31.1.67 -> v1.31.1.67
[00007472][08 00][00] v2.14.9.42 -> v2.14.9.42
[00007508][01 00][00] v1.29.5379 -> v1.29.5379
[00007552][01 01][00] v1.29.5379 -> v1.29.5379
[00007594][01 04][00] v0.5.5085 -> v0.5.5085
[00007656][03 05][00] v34.1.0.5 -> v34.1.0.5
[00007716][03 06][00] v2.4.20.50 -> v2.4.20.50
[00007838][05 00][00] v3.0.6.2 -> v3.0.6.2
[00007891][09 00][00] v5.0.0.0 -> v5.0.0.0
[00007956][11 00][00] v3.10.0.0 -> v3.9.0.0
[00008056][12 00][00] v1.11.0.0 -> v1.11.0.0
[00008155][12 01][00] v1.11.0.0 -> v1.11.0.0
[00008239][12 02][00] v1.11.0.0 -> v1.11.0.0
[00008340][12 03][00] v1.11.0.0 -> v1.11.0.0
[00008493][15 00][00] v1.1.2.0 -> v1.1.2.0
[00008557][17 00][00] v1.1.0.8 -> v1.1.0.8
[00008656][17 01][00] v2.0.1.6 -> v2.0.1.6
[00008706][19 00][00] v1.0.8.96 -> v1.0.8.96
[00010753]Packet upgrade cancelled at version checking.



[00006561]========== remo-con disconnect. boot(15) ============
[00006612]Packet [C:\WM610_FC550_FW_V01.11.01.50.bin] detected, card sn [0xb1621756].
[00006743]Packet upgrade start...

[00006794]Packet checking...
[00006851]Packet vlink 01.11.0150 <-> 01.11.0150.
[00006901]Record vlink 01.11.0150 <-> 01.11.0150 (flow = 0).
[00006951]Done.

[00006987]Version checking[1]...
[00007040][04 00][00] v1.31.1.67 -> v1.31.1.67
[00009597][08 00][00] v2.14.9.42 -> v2.14.9.42
[00009640][01 00][00] v1.29.5379 -> v1.29.5379
[00009680][01 01][00] v1.29.5379 -> v1.29.5379
[00009721][01 04][00] v0.5.5085 -> v0.5.5085
[00009809][03 05][00] v34.1.0.5 -> v34.1.0.5
[00009884][03 06][00] v2.4.20.50 -> v2.4.20.50
[00009945][05 00][00] v3.0.6.2 -> v3.0.6.2
[00009989][09 00][00] v5.0.0.0 -> v5.0.0.0
[00010064][11 00][00] v3.10.0.0 -> v3.9.0.0
[00010164][12 00][00] v1.11.0.0 -> v1.11.0.0
[00010224][12 01][00] v1.11.0.0 -> v1.11.0.0
[00010304][12 02][00] v1.11.0.0 -> v1.11.0.0
[00010424][12 03][00] v1.11.0.0 -> v1.11.0.0
[00010556][15 00][00] v1.1.2.0 -> v1.1.2.0
[00010624][17 00][00] v1.1.0.8 -> v1.1.0.8
[00010733][17 01][00] v2.0.1.6 -> v2.0.1.6
[00010780][19 00][00] v1.0.8.96 -> v1.0.8.96
[00012824]Packet upgrade cancelled at version checking.
2019-5-1
Use props
rwynant V1
Captain
Flight distance : 4316342 ft
  • >>>
United States
Offline

Have the .bin file for FW update on the sdcard....in a USB adapter

"I connected the RC to my computer and used DJI Assistant 2 and it wont recognize the firmware."

DO NOT use the computer.......with the RC OFF....insert the USB device with sdcard and .bin file.....then turn on the RC ( leave the AC OFF )  let the RC go till it's done updating.....you "might " have to relink.

Randy
2019-5-4
Use props
Teoyaomqui
lvl.2
United States
Offline

rwynant V1 Posted at 5-4 16:46
Have the .bin file for FW update on the sdcard....in a USB adapter

"I connected the RC to my computer and used DJI Assistant 2 and it wont recognize the firmware."

Will try thank you.
2019-5-5
Use props
Teoyaomqui
lvl.2
United States
Offline

rwynant V1 Posted at 5-4 16:46
Have the .bin file for FW update on the sdcard....in a USB adapter

"I connected the RC to my computer and used DJI Assistant 2 and it wont recognize the firmware."

Tried this a couple of times.

RC will start to beep as to tell me that is going to shut down.

it does not read the USB adapter.  I have tried a couple of them and no luck

I tried a USB memory stick, same result.

The light that tells you when a USB is active it only flashes really dim when the RC is turned on.

Any other subjection?
2019-5-6
Use props
rwynant V1
Captain
Flight distance : 4316342 ft
  • >>>
United States
Offline

Sounds like a bad USB connector in the RC.

They have been known to fail......As long as your RC battery is showing a FULL Charge.....and it still won't read the card.....I would think replacing the board would solve it.

BUT WAIT........... SDCARD should be clean/empty, and freshly formatted in the bird ( if that's possible )  then load the .bin file......NOTHING else should be on the card you are using.

Randy
2019-5-7
Use props
Teoyaomqui
lvl.2
United States
Offline

rwynant V1 Posted at 5-7 12:11
Sounds like a bad USB connector in the RC.

They have been known to fail......As long as your RC battery is showing a FULL Charge.....and it still won't read the card.....I would think replacing the board would solve it.

Did that.  

But would two RC have the same problem out of the box?  would DJI replace them or fix them without me paying for repair?  Just curious.  It would sux if I have to pay again just to get it off the ground.
2019-5-8
Use props
rwynant V1
Captain
Flight distance : 4316342 ft
  • >>>
United States
Offline

At this point,  sorry but you should get DJI involved as this is a NEW package, and should work.

They may help you in a blink,  or they may ask that you send it in.......I would guess you can return for refund as well, and buy somewhere else.

Randy
2019-5-9
Use props
Teoyaomqui
lvl.2
United States
Offline

rwynant V1 Posted at 5-9 15:41
At this point,  sorry but you should get DJI involved as this is a NEW package, and should work.

They may help you in a blink,  or they may ask that you send it in.......I would guess you can return for refund as well, and buy somewhere else.

Thank you for all the help you have provided Randy.

I would like to get it fix and working.

I do appreciate your help.
2019-5-9
Use props
Teoyaomqui
lvl.2
United States
Offline

Both RC where sent to DJI and got repair under warranty.  They both had bad USB/HDMI hub.  thanks  for the help and thanks to DJI for the fast response and quick action.
2019-6-3
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules