What happened here?

At FW 01.06 the sound with external microphone was slightly louder than with internal microphone. It was ok!

Now with FW 01.07 the sound with external microphone is extremely quiet.
Do I always have to set the tone before?
Why?

Udo, have you check the audio setting? at OP screen, tap the 'Pro' icon, go to the audio level setting, you can see 'Auto' or 'db' setting.


After I updated the firmware, it goes to 1db.

Findings round up after firmware update (Audio part):


With mic level adjustment, can select either 'Auto' or manual adjust from 0-20db in 1db increment. Tap 'Pro' icon at top right to the sub menu.


At the moment it is adjustable at the OP, Mimo app version 1.1.0 not yet at app store, will wait and see if it can be adjust at the phone.


A 3 section bar appears at the right top corner when mic connected !!  good to see this.


Before start a recording, go to mic setting, there is a vertical bar at the left to show the level for monitoring, and the 3 section bar moves too.

Former setting of low = 1db, moderate = 10db, high = 20db.


Preliminary test, at 'Auto' the level is higher than highest setting of 20db.... don't know if distortion will be exist at 'Auto' or not .......

Thanks!! Yes it was man. 1db
Now Automatik it is ok.
Thank you for your explanation

Udo13 Posted at 5-16 10:20
Thanks!! Yes it was man. 1db
Now Automatik it is ok.
Thank you for your explanation

Glad to know it works fine again, my friend.

Here is a link to my initial testing of various external microphone audio settings.