Anyone seen a better solution out there, than just the simple lanyard with two hooks?
Maybe a double harness that takes the relief off the neck?

Hi, thanks for the inquiry. We're hoping that you could get the best recommendation that you may need for a lanyard. Thank you for your support.

Peak Design makes a nice one but some might consider it too pricey.  It does not come with the screws.  One member of another forum makes custom screws for the SC.

ff22 Posted at 5-18 20:52
Peak Design makes a nice one but some might consider it too pricey.  It does not come with the screws.  One member of another forum makes custom screws for the SC.

Hmm, couldnt find anything on their site...

CineView Media Posted at 5-19 02:19
Hmm, couldnt find anything on their site...

https://www.peakdesign.com/collections/straps

Amazon also sells them.  If I recall, I purchased the lighter/thinner version.

If you do find one, make certain hooks are of strong quality metal.  I had what looked like a decent metal hook break.  Turned out it was coated pot metal.

Or you can try this too. https://goprofessionalcases.com/sc-lanyard-bracket.html

Im seriously considering making one and sell them, there are so many poor lanyards and solutions for Dji RC out there.
Im used to old school RC with radio trays and double harness perfectly balanced, but nobody makes it anymore, cause they probably never seen it before....

ting-ting Posted at 5-19 11:04
Or you can try this too. https://goprofessionalcases.com/sc-lanyard-bracket.html

I personally don't like the SINGLE point of attachment.  When bending over to move or reorient the drone, it tends to twist or turn so that the screen turns inward or just freely rotates.  A DOUBLE attachment is more stable in my opinion.

They did a nice job of tooling that fitting though.  

ff22 Posted at 5-19 13:20
I personally don't like the SINGLE point of attachment.  When bending over to move or reorient the drone, it tends to twist or turn so that the screen turns inward or just freely rotates.  A DOUBLE attachment is more stable in my opinion.

They did a nice job of tooling that fitting though.

Exactly, thats why i want a double harness that goes over your shoulders, and not around your neck.
Like this one http://www.secraft.net/shop/step ... ode=C20150701110307

CineView Media Posted at 5-19 13:45
Exactly, thats why i want a double harness that goes over your shoulders, and not around your neck.
Like this one http://www.secraft.net/shop/step1.php?number=1427&b_code=B20090408041642&c_code=C20150701110307

I own this harness and the tray but tray is too big. Need a custom screw with an angle to hold the SC properly. If you do find a better solution olease let us know. I'd be interested in one too.

jffry7 Posted at 5-19 16:22
I own this harness and the tray but tray is too big. Need a custom screw with an angle to hold the SC properly. If you do find a better solution olease let us know. I'd be interested in one too.

I could make a mini tray that works like the one you have from Secraft, that rests on your belly without swinging around.

First, I bought a lanyard with two hooks and it turned out to be very uncomfortable for me. And I had several scares. The hooks released with the movement and the SC was about to go to the ground several times.

At last, I bought this bracket with the lanyard, which it's fine...

https://goprofessionalcases.com/sc-lanyard-bracket.html


And I bought this lanyard from DJI. Now it's perfect for me. the SC is well attached and the lanyard is very comfortable and resistant.

https://store.dji.com/product/un ... roller-lanyard-gray

bought one at amazon.de

https://www.amazon.de/gp/product ... 0?ie=UTF8&psc=1

That's the first one I bought and I don't like at all. A waste of money, for me, of course.

CineView Media Posted at 5-19 22:57
I could make a mini tray that works like the one you have from Secraft, that rests on your belly without swinging around.

That would be great specially if a good price hahaha.

I just realize I have another harness I can use and better than the secraft

Has anyone tried to use these with SC?
BLACK - 1/4" Strap Connector Screw Adapter
Are they fit with SC?

Mell Posted at 2-14 03:03
Has anyone tried to use these with SC?
BLACK - 1/4" Strap Connector Screw Adapter
Are they fit with SC?

The holes in the SC are M4 metric.
Those 1/4” camera adaptors won’t fit.

JuJuMP2_User Posted at 2-15 16:07
The holes in the SC are M4 metric.
Those 1/4” camera adaptors won’t fit.

Tnx for info. Almost ordered them.

Can you use the SC harness with the DJI smart controller without a tray?

#Quick Reply dji dji smart controller accessories controller accessories#

would anyone be interested in a carbon or nylon carbon lanyard bracket
these could be personalised and contain pilots information etched into them if required.
price tbc

wishy Posted at 1-16 06:00
would anyone be interested in a carbon or nylon carbon lanyard bracket
these could be personalised and contain pilots information etched into them if required.
price tbc

Tell me more. Need something for the new RC Pro

Some decent choices in this section, "Smart Controller Lanyard"

I got this one from Amazon for DJI RC for mini 3 Pro controller.
It's light weight, comfortable with quick dis-connects.


https://www.amazon.com/gp/produc ... pt2_dt_b_prod_image