Please select Into the mobile phone version | Continue to access the computer ver.
Smart Controller HDMI Broadcast
195 7 5-19 02:00
Uploading and Loding Picture ...(0/1)
o(^-^)o
DanielVieira
First Officer
Flight distance : 2936650 ft
  • >>>
Portugal
Offline

Hey,

Yesterday had a job that required to do Live transmission throught HDMI via Teradek Bond, but this last bit of hardware was allways losing the feed from SC HDMI out, anyone used this allready?

I had two Teradek's with me and with SC none worked! I've tested with 3 HDMI cables.

Thanks
5-19 02:00
Use props
CineView Media
First Officer
Flight distance : 3777438 ft
  • >>>
Norway
Offline

What resolution and frame rate did you record/transmit in?
5-19 03:21
Use props
DJI Stephen
Super Moderator

Offline

Hello and good day. Thank you for reaching out and for the inquiry. I hope that you can get the best information/ recommendation from our valued DJI Co Pilots who uses the Teradek Bond. Thank you for your support.
5-19 08:51
Use props
DanielVieira
First Officer
Flight distance : 2936650 ft
  • >>>
Portugal
Offline

CineView Media Posted at 5-19 03:21
What resolution and frame rate did you record/transmit in?

I have tried all resolutions and 50/30 fps.
5-19 10:16
Use props
aerography.pt
lvl.3
Flight distance : 1980339 ft
  • >>>
Portugal
Offline

DanielVieira Posted at 5-19 10:16
I have tried all resolutions and 50/30 fps.

I've used many times, and it worked well!

What is the size of HDMI cable?
5-19 11:21
Use props
DanielVieira
First Officer
Flight distance : 2936650 ft
  • >>>
Portugal
Offline

aerography.pt Posted at 5-19 11:21
I've used many times, and it worked well!

What is the size of HDMI cable?

WIth the same hardware (Teradek Bond II)?
HDMI size 1 meter, 3 meters and 5 meters.

I know it works with other hardware...
5-21 00:37
Use props
aerography.pt
lvl.3
Flight distance : 1980339 ft
  • >>>
Portugal
Offline

DanielVieira Posted at 5-21 00:37
WIth the same hardware (Teradek Bond II)?
HDMI size 1 meter, 3 meters and 5 meters.

No, used with Blackmagic Design Micro Converter BiDirectional SDI/HDMI, and connected to Blackmagic table.
5-22 02:57
Use props
DanielVieira
First Officer
Flight distance : 2936650 ft
  • >>>
Portugal
Offline

aerography.pt Posted at 5-22 02:57
No, used with Blackmagic Design Micro Converter BiDirectional SDI/HDMI, and connected to Blackmagic table.

Ah ok...That way i also know that it works!
5-22 04:49
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules