I have one of the early models of the Spark with broken Gimbal. I have purchased new gimbal camera but I cannot unscrew te middle screws to replace the broken one.

I have tried bunch of diffrent screwdrivers but the middle ones are not deep enough for H1.5 to turn. I don't want to force and broke the thread.

What kind of screewdriver do I need?

Hi, we're sorry for the inconvenience. We would recommend sending the unit into our facility if the drone has damage to possibly use the warranty as we don't recommend fixing the drone by our customer's end due to warranty avoidance. However, if your drone is no longer under the warranty period, you check our recommended repair service which can be reached via the link below. We do appreciate your understanding.

https://www.dji.com/service/repair/centers

Hi,

Can you show us a photo which screws you mean?

Cheers,
Wolferl

Middle ones under the battery.

And unfortunately I am out of the warranty.

Same here..   No reply?

I've ended up to sending it to DJI support for fix.

MemduhGorkem Posted at 2019-6-18 20:20
[view_image]

The middle screws have a drop of glue to notify DJI of tampering.  You can pull it out with a needle.   

Can confirm LMuliolis info - no special tool required, only a needle to remove two small pieces of silicone inside these nuts, all 6 screws are 100% identical

They were not silicon filled. The holes were too shallow the screwdriver couldn't grip.
When service fixed the drone they have replaced them with good ones.