Kinematic Digit
lvl.2
Canada
Offline
|
m.hertenberger Posted at 8-1 17:58
Would you mind sharing settings you make on the camera? I am unable to get past the SC doing anything more than focusing when I press the record button, but no photo or video is ever taken. I have tried a variety of combinations of camera connection/tethering settings to no avail...
Yeah you have to do it in a set order, and it only gives you photo control with the red button. There is no video control (this is mentioned in the Camera Compatibility document).
You must have the camera off before powering up the gimbal. Once it is powered up, plug it in and calibrate it. Then turn on the camera. The red button will then control photo functions. If you want to change photo functions, you need put the gimbal to sleep by hitting the M button once. The motors should relax and give you camera control. Press M again and it should wake the gimbal. If it does not work, then turn off the camera and turn it back on. The camera sleeping can also cause it to fail.
DJI as far as I know is still working on this, and it’s only a partial implementation of compatibility. If you want to do video do not run it with the cord. You’ll have to either use the app to turn on the video or hit the button on the camera on your own. There is no Video support at this time. |
|