I bought new Gamesir T1d controller for my Tello, but after a few days I encountered problem on joystick. The Joystick was not in the center during my calibration and cannot go back on the center after the calibration. The Left stick was going down ward while my Right stick going to the left. I wonder why it was happened? it never been dropped.


ANYONE HAVE SAME ISSUE OR ANYONE CAN SOLVE THIS PROBLEM.


Thank you in advance for someone can solve and share on how to troubleshoot this problem.

GUYZ FINALLY... I GOT MY OWN SOLUTION... HEHEHE... SIMULTANEOUSLY PRESS POWER ON AND "A"... IT FIX THE PROBLEM... ^_^

Shander Posted at 2019-7-31 01:20
GUYZ FINALLY... I GOT MY OWN SOLUTION... HEHEHE... SIMULTANEOUSLY PRESS POWER ON AND "A"... IT FIX THE PROBLEM... ^_^

POWER ON AND "A"... did not FIX THE PROBLEM for me.

The left controller stick is often not centered. What else could solve the issue??

I downloaded and run the Gamesir T1D upgrade/calibration .akp but it only confirmed the problem.

One stick is not centered. It never fell or had other stong impacts. Could it still me a mechanial issue? Physically the stick is in the middle. Just in the software it is off.

Solved!  I had warranty and exchanged the controller. The new one is fine.

The new controller has now the same problem. Pressing "power" and "A" does not fix the problem. Can anybody advice?

Tons of people have this. Nothing fixes this problem

Hi, although this post is old, my answer may be useful to anyone who still has the problem. The solution is simple, you have to uncover the joystick. On the left stick you have to apply isopropyl alcohol and move it in all directions. It's like washing it with alcohol. Let the fan dry, in my case for a whole day. And voila, now the stick is centered again. Regards