Hi
I have the same problem if many people ( i have read many thread about this )
I try to resolve doing the calibration of RC...and it looks lige good because rc stop beeping
after 60 seconds i try to re-turn on my air...and it come again...bep bep bep bep bep bep

and the strange thing is that the app said RC CONNECTED
what could be ?
sorry for my english
thank you everybody for your help

It may be the battery has a fault - try discharging the battery in the RC then fully recharge it and refresh the FW on the RC using assistant 2 for the Mavic 2

It is probably because your drone isn't powered on and only the RC has been powered on and when it beeps like that it's because it is not bound to a drone and the has been powered on for some period of time...

David Martin Graff Posted at 8-11 03:13
It is probably because your drone isn't powered on and only the RC has been powered on and when it beeps like that it's because it is not bound to a drone and the has been powered on for some period of time...

No no i haven't write on my post but i  :
first i turn on the drone and next i turn on the RC

A J Posted at 8-11 01:47
It may be the battery has a fault - try discharging the battery in the RC then fully recharge it and refresh the FW on the RC using assistant 2 for the Mavic 2

Ok , i till try
i have to use that app on mavic air also if it is for mavic 2 ?

ps ok i have downloaded it

i have to connect my RC via usb to pc right ?

sirioilmago Posted at 8-11 04:17
Ok , i till try
i have to use that app on mavic air also if it is for mavic 2 ?

My mistake - use the original Assistant 2 for the Mavic Air

A J Posted at 8-11 04:21
My mistake - use the original Assistant 2 for the Mavic Air

thank you !
today i will discahrge my RC and i will try
can i write you in private for helps ? im a rookie in this things

sirioilmago Posted at 8-11 04:23
thank you !
today i will discahrge my RC and i will try
can i write you in private for helps ? im a rookie in this things

By all means - PM me on here if you need any further tips.

Hi, we're sorry for the inconvenience. We're glad to know that you've managed to re-calibrate the remote controller to possibly rectify the problem, however, it seems that the concern remains. Like David mentioned, ensure that the remote is connected to the aircraft or you may try to re-link it to the aircraft to see if there will be changes. The message says "RC connected" means that the DJI Go 4app is connected to the remote. For additional information, please make sure that the battery of your unit is fully charged and the firmware is updated. Please keep us posted on the latest progress. Thank you for your support.

I have had experience of this, a simple refresh of FW seemed to cure the situation .

J'ai le même problème de bip bip bip.
J'ai fait la mise à jour avec le dernier firmware pour le controller mais le problème persiste un peu. Les bip s'arrêtent au bout de quelques secondes mais je dois régulièrement régler le compass, défaut qui n'existait pas avant. Le drone a aussi des réactions qu'il n'avait pas avant et reste difficilement en stationnaire.

J'en conclue que le dernier firmware du controller n'est pas bon.

Hi
im back again !
looks like problem was solve but...today he comes back...but i have see the things is random...
what can i do ?
i don't want recalibrate the RC every time !!