Please select Into the mobile phone version | Continue to access the computer ver.
How to get started with your phantom 3 standard
1676 0 2019-8-16
Uploading and Loding Picture ...(0/1)
o(^-^)o
Miro Perez
lvl.4
Flight distance : 25374 ft
United States
Offline

So you just got your new Dji phantom 3 but you are confused on how to use it. Hopefully this helps.To get started download the original Dji go app and make sure you have an account set up.Now unbox your drone and locate your drones battery and charger.The drone might have come with some charge but plug it in so you will be ready for your first flight.Be sure that your controller is also charged or else you’re not going anywhere,now fire up your Dji go app and get ready.Once your drone and controller are charged remove the gimble guard and lens cap and power them on.Once they are on you can go to your devices settings and after a few seconds the WiFi for the drone should appear then connect to it using the factory setting WiFi password which may be different so check your owners manual. Now switch back to the app find your drone model and select camera. Now you are linked to your drone, so turn it off take it outside put on those props and your ready to go. You can now either use the auto take off feature or put both the sticks inwards on the bottom corners until the propellers spin up, then you are ready to go.
2019-8-16
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules