Please select Into the mobile phone version | Continue to access the computer ver.
Controlling F-ports A3 with lightbridge 2 slave remote?
287 0 8-25 07:29
Uploading and Loding Picture ...(0/1)
o(^-^)o
fanse63c3931
lvl.2
Flight distance : 1063 ft
Belgium
Offline

Hi there,
Just wondering if it could be possible or is there a way to control the A3 F-ports bij using the Lightbridge 2 slave remote instead of the channel expansion module?

now i using an external receiver and transmitter (Futaba) to have enough PWM (or S bus but that is not an option on DJI) to let the camera operator control the non dji Gimballe & Camera.

Altough I have a slave remote for the Lightbridge 2  and it would be easyer to gave a setup with the 2  DJI transmitters.
Nou the camera operator is getting the HDMI image by means of a cable from the master transmitter, but in this case he could have his own DJI go app and immage on the slave transmitter i think.

So anyone done this our is it realy a must to have the expansion kit?

Thanks

PS  DJI lightbridge 2 end of life , what about it?


8-25 07:29
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules