Please select Into the mobile phone version | Continue to access the computer ver.
PolarPro tripod mount iPhone X case compatibility!
239 11 8-29 04:56
Uploading and Loding Picture ...(0/1)
o(^-^)o
El Diabolico
Second Officer

Germany
Offline

Just a little warning for anyone looking to buy the Polarpro tripod mount to use with an iPhone on a protective case...

You will need either to use the PolarPro Grip with your phone without a case or a super, super, paper thin case.
I normaly use a really thin Spigen Neo Hybrid with my OP but now, unfortunately it keeps disconnecting as the lightning connector has not enough clearance anymore due to the added thickness of the PolarPro tripod mount itself. The only option no to get your device disconnecting constantly is to use the (cumbersome) PolarPro Grip with it. Bummer.




Picture1.jpg
8-29 04:56
Use props
A J
Captain
Flight distance : 11526437 ft
  • >>>
United Kingdom
Offline

Nice set up
8-29 06:36
Use props
DJI Tony
Super Moderator

Offline

Hi, we do appreciate sharing this compatibility matter with these accessories to our valued DJI Forum members. Thank you for continued support.
8-29 08:11
Use props
El Diabolico
Second Officer

Germany
Offline


It works but actually the Grip is not 'grippy' at all. It is just a plain plastic. Lower quality than usual for PolarPro...
9-1 23:47
Use props
El Diabolico
Second Officer

Germany
Offline

DJI Tony Posted at 8-29 08:11
Hi, we do appreciate sharing this compatibility matter with these accessories to our valued DJI Forum members. Thank you for continued support.

You're welcome Tony, learning by doing ;)
9-1 23:48
Use props
A J
Captain
Flight distance : 11526437 ft
  • >>>
United Kingdom
Offline

El Diabolico Posted at 9-1 23:47
It works but actually the Grip is not 'grippy' at all. It is just a plain plastic. Lower quality than usual for PolarPro...

Thats not good - thanks for the heads up
9-2 00:42
Use props
djiuser_SGtX4I7iJci7
lvl.4
United Kingdom
Offline

Is this the grip system where the OP sits in a small cradle with a couple of tripod mounts which then slots into the phone holder thingy?  So you can just mount the OP in it’s cradle onto a tripod or attach the whole shooting match, phone and all, to a tripod?
9-2 00:50
Use props
Montfrooij
Captain
Flight distance : 1684544 ft
Netherlands
Online

Thanks for the tip!
9-2 06:03
Use props
El Diabolico
Second Officer

Germany
Offline

A J Posted at 9-2 00:42
Thats not good - thanks for the heads up

You're welcome
9-2 06:31
Use props
A J
Captain
Flight distance : 11526437 ft
  • >>>
United Kingdom
Offline


.
9-2 06:32
Use props
El Diabolico
Second Officer

Germany
Offline

djiuser_SGtX4I7iJci7 Posted at 9-2 00:50
Is this the grip system where the OP sits in a small cradle with a couple of tripod mounts which then slots into the phone holder thingy?  So you can just mount the OP in it’s cradle onto a tripod or attach the whole shooting match, phone and all, to a tripod?

That's correct. The Tripod Mount itself is very good. it also protects the OP effectively. The problem is using the OP with your phone when the small screen isn't enough. This means having to carry the Grip everywhere.

I've also tried the PGYTECH that has excellent reviews but the fit was very tight upon installation and it scratched the Pocket's body. I haven't seen many negative reviews out there so I might had a slightly defective unit (returned it).
9-2 06:35
Use props
DJI Tony
Super Moderator

Offline

El Diabolico Posted at 9-1 23:48
You're welcome Tony, learning by doing ;)

We do appreciate your continued support to our DJI Products.
9-3 15:30
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules