ruudy
lvl.1
Offline
|
bransmi Posted at 9-2 00:45
Thanks but screen showed the process was incomplete and would not allow me to move to the next step. The process seemed to be automatic - moving from task 1 to 2,
I had the same problem, because I was doing it wrong, search on youtube Spark IMU calibration. very clear instructions.
Step 1 Spark flat on the ground step 2 on its side, check which way the DJI logo is at, step 3 on its other side step 4 straight up step 5 on its back, that's it simple |
|