djiuser_ueX72W2ROjGo
New
Offline
|
DJI Tony Posted at 9-9 11:53
Hi, we're sorry for the inconvenience. The failsafe RTH would be automatically activated if the remote controller would be disconnected to the drone. However, having active interferences within the location, may not perform the RTH procedure properly and cause an incident to the drone. We would recommend flying the drone in an open area without interferences and always do the pre-flight checklist prior to the flight. You may also refer to the screenshots below about GPS and RTH procedure. Thank you for your support.
[view_image]
I have the same problem: during the flight error "exit p-gps" was occured sometimes. I was trying to land it, but instantly my Sparj lost any control and disapeared from the view with hight of 43 m.
I try to return it to home switching on "RTH" mode, but without success. Few seconds after the connection was lost. What I have to do? Is there some way to find it?
I lost it completely with 12 satellits signal on GPS and 74% of battery charge.
On the flight records his way was ended when the error was occured.
|
|