Hi

How to do the aircraft reset after have callibrated the IMU?

can possible be a non sense question but the problem is that after disconenct and connect the aircraft, the message remains at the settings resume

IMU

It says " Restart" not "Reset" .... Did you power it off and then back on?

After the IMU calibration has successfully completed you need to restart the AC by switching off the flight battery, let the drone completely shut down then turn it back on ensuring that the drone remains on a flat, level surface when doing so. If, after doing that, you get the same message to restart then do the claibration again after the drone has completely cooled down to room temperature. It is vital that the AC is on a dead flat level surface and is not touched or near any vibrations during the calibration while also ensuring that you follow the screen promotps in repositioning the drone when advised by the app.

Hi, we're sorry for the inconvenience. May we know what happened to the drone prior to experience this error message? Have you tried to re-calibrate the IMU and restart the aircraft to see if there will be changes? Have you done updating the firmware? You may refer to the video tutorial for IMU calibration. Please keep us posted on the latest progress.

hi my dji mavic 2 pro gives reset error but i have no way to reinstall it