Please select Into the mobile phone version | Continue to access the computer ver.
All components required for a ready to fly package?
512 4 9-22 12:19
Uploading and Loding Picture ...(0/1)
o(^-^)o
CineView Media
First Officer
Flight distance : 3778409 ft
  • >>>
Offline

Are all the components on this page all you need for a turnkey fvp rig?
https://store.dji.com/category/dji-fpv?from=shop
9-22 12:19
Use props
DJI Stephen
Super Moderator

Offline

Hello and good day CineView Media. Thank you for reaching out and thank you for posting this link. You may refer to the link for you to be able to create a DJI Digital FPV system drone. In addition the DJI Digital FPV System was designed for the drone racing industry. It consists of the DJI FPV Air Unit Module, DJI FPV Camera, DJI FPV Goggles, and DJI FPV Remote Controller, all of which are packed with powerful features and serve a significant role in the development of our HD Low Latency FPV system. DJI have redefined drone racing, delivering lower latency rates, stunning HD resolution, and, most importantly, an unforgettable FPV flying experience. Thank you.
9-22 12:36
Use props
FPV Thailand
lvl.3
Flight distance : 386811 ft
Offline

Nope, you still need to buy the airframe, the motors, the props, the flight controller. You have to solder and build it together after which you need to flash the firmware to the board with betaflight and complete the registration process with DJI
9-22 16:26
Use props
CineView Media
First Officer
Flight distance : 3778409 ft
  • >>>
Offline

FPV Thailand Posted at 9-22 16:26
Nope, you still need to buy the airframe, the motors, the props, the flight controller. You have to solder and build it together after which you need to flash the firmware to the board with betaflight and complete the registration process with DJI

Did you even visit the link i posted?
9-25 22:58
Use props
A J
Captain
Flight distance : 11526437 ft
  • >>>
Offline

FPV Thailand Posted at 9-22 16:26
Nope, you still need to buy the airframe, the motors, the props, the flight controller. You have to solder and build it together after which you need to flash the firmware to the board with betaflight and complete the registration process with DJI

The list includes the airframe!
9-26 05:09
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules