Dheylin
lvl.1
Offline
|
Mr.BobbyD Posted at 9-26 11:47
Update went swimmingly. I have tested Force Mobile to be working & Active Track too. I am having issues with the new 360 roll features. Pressing the Mode Button 3 times puts the gimbal into 360 roll position, but when I press the joystick left (or right) twice to initiate the new Auto 360 roll, the camera gets about 30 degrees through the rotation before it freezes up, jitters like crazy for about a second, then returns to centered position & restarts the auto 360 roll function. The issue repeats itself continuously until I press the Mode Button to change modes. This same issue occurs if I manually attempt to do a 360 roll using the joystick.
I've done a gimbal balance test and calibration and neither returned any errors. I used the app to switch to 360 roll mode & the issue still occurs. When I use the 3-toggle Mode Button press to switch to 360 Roll, I can confirm that the app sees the switch and sets the 360 Roll flag to "On." Lastly, Ive reattached the gimbal to my Windows 10 laptop, & done a "refresh" on the new firmware update and it went through (again) with no issues.
mine is working fine, just "press and hold the trigger" no longer lock the til and pan axis |
|