Overview:

• Date: 2019.09.26
• Firmware: v1.2.0.10
• DJI Ronin App iOS: v1.2.4
• DJI Ronin App Android: v1.2.4
• User Manual: v1.2
  

What’s New?

• Added video recording, autofocus, and focus pull support for Sony A7R4 cameras with supported E-mount lenses using a Multi-Camera Control Cable (Type-C). To use autofocus on the A7R4, press halfway down on the camera control button of the gimbal.
• Added photo capture, video recording, zoom, and focus pull support for Sony A7R4 cameras using a Multi-Camera Control Cable (Multi USB). To use autofocus on the A7R4, press halfway down on the camera control button of the gimbal.
• Added photo capture, video recording, and autofocus for Fujifilm X-H1, X-T2, X-T3, X-T20, X-T30, X-E3 cameras using a Fujifilm camera control cable (RSS-F).
• Added a quick switching function to Portrait mode. Press M button twice to enter/exit Portrait mode. Portrait mode requires using Ronin-SC in Flashlight mode and the joystick control is not available. Portrait mode can be disabled on the Ronin app Status page (requires Ronin app v1.2.4 or later). Note that the tilt axis will rotate 90° when switched to Portrait mode. Make sure the camera will not collide with the gimbal.
• Added Force Mobile when using with the Android version of the Ronin app (requires Ronin app v1.2.4 or later).
• Added disable 3D Roll 360 feature in the Ronin app (requires Ronin app v1.2.4 or later).
• Fixed issue where the roll axis occasionally drifts after exiting sleep mode.
• Optimized zoom adjustment when using a Sony camera’s multi-port with a power zoom lens. The zoom speed can be set from 1 to 100 (requires DJI Ronin v1.2.4 app or later).
  

Notes:

• Update the firmware through the DJI Ronin app. Make sure that the DJI Ronin app is the latest version when updating the firmware.
• If Ronin-SC has a camera attached and is turned on while updating the firmware, make sure to protect the camera and lens, as the motors will shut off during the update.
• If the firmware update fails, restart Ronin-SC and retry.
  

Thanks for the info!

Just updated.. thanks for the Fujifilm support!

I cannot update. The SC is not found by the DJI assistant software on Windows, and the mobile app cannot retrieve the firmware version...

DJI is on the ball! Constant updates like this really mean a lot to us. Thank you thank you

Thank you for the information!!!!

When will the version be available DJI Ronin App iOS: v1.2.4 in AppStore Mexico?

@DJI Support

Thanks, but what about the Motionlapse that is available for iOS and missing at the Android app?

Thank God the roll axis drift is fixed, totally when crazy every time when to sleep mode and the roll axis slight drift away while shooting.

Anyways great job DJI

Thanks for the update DJI. I can confirmed that my Ronin SC now has Force Mobile working with Asus Zenfone 5 ZE620KL, G85 & Panasonic cable. Thank you once again.

Thank you DJI for the Force Mobile Android support, thats a uge step for me.
Overall thank you for the everytime updates! :-))

Thanks and regards

So will we be able to do motionlapse with Fuji xt3?

Hello,

i have problems connectiing the roninsc with the mobile app. when i tried to connect the bluetooh the app reject the paring, and into the app only appears a promp with the password 12345678.

What can i do? i have a xiaomi MI 9 device.

Best regards

Thanks for the update....
But when focus pulling for Sony a6500 from focus wheel?

Thanks

Just updated to FW 1.2.0.10 and tried it with IOS and Android. Both apps are 1.2.4.  
But only IOS works, not Android with the Force Mobile.
I use Huawei 10 Mate Pro.
@DJI Support is it something I can do?

Firmware up to date on XT-3 and Ronin SC as of today, still no record button functionality.

Bought my Ronin SC today, updated to this firmware, followed YT videos on how to balance. Done everything right, hardware is balanced but the app says the Yaw is off.

When tilting 45 degrees the gimbal starts to vibrate heavily and the motor power goes to 100%

Thanks ! A lot ! Very nice functions !

Have you fixed the return to center issue after panning ?

Is there anyway to update on OSX 10.15 Catalina? The installer does not work.

How about for us Canon Mirrorless users? I got EOS M6 and I can’t even use the start and stop recording of Ronin SC. Please support my old camera. TiA

Saludos tengo un problema al conectar la canon m 50 al ronin sc. He probado con varios cables y nada. Le adjunto la imagen del problema que tengo. Gracias. Djbryan507@hotmail.com