Please select Into the mobile phone version | Continue to access the computer ver.
How do I solve "Invalid turning radius" in Waypoints
994 7 2019-9-26
Uploading and Loding Picture ...(0/1)
o(^-^)o
pjotrett
lvl.2
Flight distance : 643796 ft
  • >>>
Offline

Have this unsolved issue since some days and can't find any good answers to the problem.
I have created a very complex Eaypoint Mission and evry time I try to let it go I get this message: "Invalid turning radius" But it does'nt tell whats wrong with the turning radius.
Please help me!
2019-9-26
Use props
pjotrett
lvl.2
Flight distance : 643796 ft
  • >>>
Offline

2019-9-26
Use props
Fre Mo
First Officer
Flight distance : 803868 ft
Offline

Try to update the firmware, waypoints have been improved.
2019-9-28
Use props
vasylly
lvl.1
Greece
Offline

Hi. did you end up solving the “invalid turning radius” error? I have the same issue.
2020-7-15
Use props
vasylly
lvl.1
Greece
Offline

Hi. did you end up solving the “invalid turning radius” error? I have the same issue.
2020-7-15
Use props
pjotrett
lvl.2
Flight distance : 643796 ft
  • >>>
Sweden
Offline

vasylly@icloud.com Posted at 7-15 21:56
Hi. did you end up solving the “invalid turning radius” error? I have the same issue.

Hi! Dji Go4 did’nt solve the problem so I switched over to Litchi where it works perfecly!
2020-7-16
Use props
vasylly
lvl.1
Greece
Offline

pjotrett Posted at 7-16 00:42
Hi! Dji Go4 did’nt solve the problem so I switched over to Litchi where it works perfecly!

I solved it, the error may occur if you happen to move an arced waypoint, which may then make the previous arc radius invalid,  just go back into the moved waypoint and redo / recheck the arc by swiping up/down to ensure the arc ‘snaps’ back into an acceptable range
2020-7-17
Use props
Dirty Bird
Captain
Flight distance : 7625846 ft
  • >>>
United States
Offline

One of those nice cryptic error messages that leaves you scratching your head.  Probably the radius of two curved turns are overlapping.  I can't remember the Litchi error message for such a condition, but it's even less helpful.

I had it happen loading a 60,000' test circut with dozens of turns.  In moving waypoints, the curved turn radii overlapped at one spot.  Like to never found the problem.  Max zoom & I finally spotted the blue curve lines touching.  Backed off one radius & it was fixed.

It would be nice if the errant waypoint would appear in red or flash to assist in locating the problem.
2020-7-18
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules