FrankCohen
lvl.1
Offline
|
I have a Mavic Air. I bought it about 8 months ago. It worked great. No big crashes or anything broken. I did the recommended upgrade today and now I see the IMU will not work and I get a bunch of error messages, including one that says "Check the 8-pin plug that connects the damping plate and the aircraft."
I researched the problem in the DJI Forums, on YouTube, and with a Google search. I found no definitive answer.
I used the DJI Assistant application on my MacBook Pro to reinstall the firmware on the Air, on the Controller, and made sure I am running the latest app on my OnePlus 5 Android phone. Same behavior as above.
I use the DJI Go 4 app to recalibrate the gimbal. The camera moves around from place to place. The warning message in the app says the calibration is at 10% and does not change from that value.
I try the IMU Calibration by pressing the Start button. No reaction to the button press.
See the attached screen shots for details on what I am encountering. I would love to use my Mavic Air again, and soon.
Thanks for your time.
Frank
|
|