kevinde
lvl.1
Flight distance : 97861 ft
United States
Offline
|
I hope this thread isn't dead - I have a gittery gimbal too.
New build of an S800 Evo with A2, OSD MKII, Z15N with Nex 7. I have tried mapping the gimbal mode on channel 11 aux2 and on channel 9 aux6. I have tried connecting the GCU to can 1 through the OSD and to can 2 through a canhub. Best I can get is the default orientation mode and vibrations in the gimbal in the other two modes. Assistant software says this should be working but it's not.
Inflight all is well, but only orientation mode works. I can pan, roll, and tilt, but the other two modes are unavailable.
Currently have mode running through channel 9, aux6 and the forward / down orientation seems to work on channel 11 aux2, but only in gittery (vibration) FPV (or reset) mode. Will not move to down/forward orientation unless mode is set to FPV, as it should. And even in this mode gimbal is spasming, but I can see it trying to tilt.
Also I sometimes lose camera FPV view after switching to either of the two gittery modes. Black screen with OSD info only. Might be related. Bad plug? Crimped wire? Have no idea what is going on. All the connections seem to be good.
Help? |
|