I bought new M2P, calibrated IMU, compass and gimbal, when I move to the left or right side (roll axis) using right joystick in mode 2 into left or right the gimbal does not keep horizon level. Can someone help me whats going on?
Hello and good day owiecPL. I am sorry for the trouble this has caused. Can you please try to calibrate the gimbal of your DJI Mavic 2 Pro. Or I would suggest you manually adjust the gimbal level of your drone on the DJI Go 4 application settings. Just go to main controller settings > Gimbal Settings > Adjust Gimbal. Please keep us posted on the said issue for us to assist you further. Thank you.
DJI Stephen Posted at 10-15 08:53
Hello and good day owiecPL. I am sorry for the trouble this has caused. Can you please try to calibrate the gimbal of your DJI Mavic 2 Pro. Or I would suggest you manually adjust the gimbal level of your drone on the DJI Go 4 application settings. Just go to main controller settings > Gimbal Settings > Adjust Gimbal. Please keep us posted on the said issue for us to assist you further. Thank you.
Stephen, on video from first post You can see that gimbal drifts. It is not still in one bad angle what can I repair by adjusting manually. On the ground camera also drifts - not keep one position.