Hi
Does anybody have idea about reversing start and end points in GS RTK?

I try changing direction of flight path but GS RTK insisted on its idea.

regards,

In the kml mission, click on the green starting point. It will change from start to end.

Hi GEORobson, can you please clarify how to do this? We can't seem to get it done. Clicking the green starting point just changes the flight  path.

GEO ESL Posted at 11-20 00:47
Hi GEORobson, can you please clarify how to do this? We can't seem to get it done. Clicking the green starting point just changes the flight  path.

Clicking the green start point turned it into an end point. However, it stopped working and I don't know why.

Anyone else figure this out?

I've been able to come up with a work around for this that works in the Terrain Awareness mode (I would assume it would also work in the KML mission mode).

When drawing your polygon, ensure that the first waypoint you enter is where you want to start the flight grid. Then as you adjust the flight direction, it'll work around this and try to start from this point. Hope this helps.

dodger_rog Posted at 2-5 15:50
I've been able to come up with a work around for this that works in the Terrain Awareness mode (I would assume it would also work in the KML mission mode).

When drawing your polygon, ensure that the first waypoint you enter is where you want to start the flight grid. Then as you adjust the flight direction, it'll work around this and try to start from this point. Hope this helps.

Thanks for the response dodger, I'll give this a try on my next project.

Is there still no way to switch the start and endpoint in the mission planning on the GS RTK App ?
I'm using terrain awareness mode with KML import.
However in the linear mission planning it is very easy to change the startpoint because there you can tap on the dotted circles and it will change your startpoint. But the linear mission planning sadly doesnt work with the DSM and KML import like in the terrain awareness mode.

I haven't found anyway.

SurveyP4RTK Posted at 2020-11-2 06:27
Is there still no way to switch the start and endpoint in the mission planning on the GS RTK App ?
I'm using terrain awareness mode with KML import.
However in the linear mission planning it is very easy to change the startpoint because there you can tap on the dotted circles and it will change your startpoint. But the linear mission planning sadly doesnt work with the DSM and KML import like in the terrain awareness mode.

Can you step me through how you are getting a KML import in the terrain awareness mode? I can't seem to figure out how to import the KML.