Does anyone know if the Epson Movario BT-300 glasses will work with the Smart Controller?

Hi, thanks for the inquiry. We highly recommend contacting the manufacturer of this product for further information in regards to this matter. Thank you for your support.

DJI Tony Posted at 10-24 08:16
Hi, thanks for the inquiry. We highly recommend contacting the manufacturer of this product for further information in regards to this matter. Thank you for your support.

Thanks for your reply. I did some research on my own which I should have done before I made the post and found out that the BT-35E and maybe the BT-30E are better suited for the Smart Controller.

rbtmckny Posted at 2019-10-24 18:30
Thanks for your reply. I did some research on my own which I should have done before I made the post and found out that the BT-35E and maybe the BT-30E are better suited for the Smart Controller.

I spoke to Epson and they said BT35e should work. BT35 is past through signal. Bt300 woks of Moverio IOS. THEY it SHOULD WORK.?

ChevelleSS Posted at 11-4 19:08
I spoke to Epson and they said BT35e should work. BT35 is past through signal. Bt300 woks of Moverio IOS. THEY it SHOULD WORK.?

That is probably the solution. I've been looking for a BT35E HDMI box for a long time - without success. I have already written to several EPSON service centers, in the EU and outside, no chance. Since I have the BT300, I am not buying the BT35E set new. You could buy one here: https://compassmicro.com/interface-box-for-moverio-bt-35e.html

The link does not work correctly. Copy and paste line, then it works ...
Unfortunately compassmicro does not deliver to the EU.