Please select Into the mobile phone version | Continue to access the computer ver.
D-RTK 2 station: Galileo recording
145 2 11-18 19:46
Uploading and Loding Picture ...(0/1)
o(^-^)o
tutos
lvl.2

Chile
Offline

Hi,
my D-RTK 2 station (firmware 02.02.0014) don't record the Galileo constellation, only save GPS, Glonass and Beidou. The P4R save GPS, Glonass and Galileo, so only can do PPK with GPS and Glonass.

Anyone with the same issue?


DRTK 2

DRTK 2
P4R.jpg
11-18 19:46
Use props
mbuonanno
lvl.3

Italy
Offline

Hi tutos,

did you save the D-RTK2 raw data (GPS, Glonass and Beidou) while using it as a RTK BASE station for the P4RTK ? Did you setup the D-RTK2 to calculate its position using Custom NRTK corrections (i.e. 4G dongle + NTRIP data)?  I would like to replicate your setup.

Maurizio

P.S. Could you please shift this topic toward the "NEW D-RTK 2 "User Manual"!!!" one, in this way it will be easier to follow all the news about D-RTK2.
11-19 06:50
Use props
tutos
lvl.2

Chile
Offline

mbuonanno Posted at 11-19 06:50
I tutos,

did you save the D-RTK2 raw data (GPS, Glonass and Beidou) while using it as a RTK BASE station for the P4RTK ? Did you setup the D-RTK2 to calculate its position using Custom NRTK corrections (i.e. 4G dongle + NTRIP data)?  I would like to replicate your setup.

Hi mbuonanno,Yes, i saved the logs (rtcmraw folder) from the base via usb. The mission was always with rtk fixed.
To convert the DAT file from rtcmraw folder, i use RTKCONV, and set it to import all the satellite system available.

Anotación 2019-11-19 232330.jpg
11-19 18:28
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules