I did update firmvare for rc  inspire2 when rc was udated 99 % it off. and after that cant on. diods not blinking how try to on same don binking then I charging.  I charge after that 1 hour. everything same look like dide rc.

I have the same problem with my phantom 3 radio. Can you help me? I can't turn on... leds off... please, help me !

I updated my Phantom 3 radio (GL300C) and it turned off after updating. All LEDs are off and the radio does not turn on. Could anyone who had the same problem help me?

Inspire 2 stock remote
1) Have you tried to put the remote on the charger and see if the LEDs  light up? While the remote is plugged into the charger, then try to power on the remote.
2) try double tapping and then hold the power switch.

3) connect the remote to your computer and see if DJI assistant will  see the controller.
Rich

The only other thing is to remove the battery power and then restart. This requires taking the remote apart and will void the warranty.

RichJ53 Posted at 12-2 21:10
Inspire 2 stock remote
1) Have you tried to put the remote on the charger and see if the LEDs  light up? While the remote is plugged into the charger, then try to power on the remote.
2) try double tapping and then hold the power switch.

Step 1, 2... not success!
I'll try to remove the battery but i don't have the keys...  Tanks!

eror 0x002

sorry eror 0x02

fans5bb7b252 Posted at 12-2 23:22
Step 1, 2... not success!
I'll try to remove the battery but i don't have the keys...  Tanks!

The same thing happens to me in the station of my "phantom 3 advanced".
I tried all this and it still doesn't work.
When connecting the charger, a sound like vibration is heard but no light comes on.
Any other idea?
Best regards!