Please select Into the mobile phone version | Continue to access the computer ver.
Joystick Error
14845 20 2019-12-8
Uploading and Loding Picture ...(0/1)
o(^-^)o
Kune
First Officer
Flight distance : 1540974 ft
  • >>>
Spain
Offline

Hello,

Everytime I start the ronin app I get a message "Joystick error. Run Auto Tune for Joystick and restart gimbal".

The joystick is not functioning properly, time to time it moves/drifts automatically as if I was pressing the josystick a bit... so I guess the app detects that..

Does anyone know what is this kind of Joystick auto tune? I just see the Motor autoune but not for Joystick.
2019-12-8
Use props
fans78f1d43c
lvl.1
Flight distance : 256601 ft
Slovenia
Offline

Same problem here all the time
2020-1-2
Use props
n00kia
lvl.1
Flight distance : 256601 ft
Slovenia
Offline

I after 3 rounds of calibration it stays ok for 3-5 mins then it gets drifting again, I will rma it in a week if I get no response from dji
2020-1-2
Use props
VsMeister
lvl.1
Georgia
Offline

Same for me at all time,my gosh how to Run joystick auto tune ..
2020-1-11
Use props
reflexmotion
lvl.1

South Africa
Offline

I also just got this joystick error.  I did the standard auto tune, powered down and restarted and the error has gone away.  However I now cannot use the joystick in M3 (works fine on M1 and M2).  Any ideas?
2020-1-26
Use props
Eduardo Romero
New

Mexico
Offline

Trigger
Press and hold to use the Lock Mode.
Tap twice to recentre the Ronin.
Press three times to turn the camera 180°
Tap four times then hold to calibrate the joystick. Move the joystick in all directions then tap four times and hold to complete the calibration.

ITS WORKS
2020-1-28
Use props
fans22e50ec9
lvl.1
United States
Offline

Eduardo Romero Posted at 1-28 17:17
Trigger
Press and hold to use the Lock Mode.
Tap twice to recentre the Ronin.

Yeah tired that whole thing.
With all the taps and the joystick calibration, and it’s cool for like a minute.
But once you start switching between the user modes and using the joystick it still does the drifting
2020-2-7
Use props
fans7316640a
lvl.1
Italy
Offline

Hello,
I keep having the same issue with the joystick. In my experience most of the time is a matter of touching the joystick a bit and playing with it to get behaviour back to normal. I am sure is a faulty part the guys at DJI know about but don't now how to fix it.
Very annoying though.
2020-2-13
Use props
Nicolas_ks
lvl.1

Argentina
Offline

Estou com o mesmo problema aqui, ja fiz todas as regulagens mas continua. alguém consegiu resolver?
2020-8-24
Use props
djiuser_24F6I4mgq4et
New

Switzerland
Offline

I have the same issue with my Ronin RSC2. I tried everything and by doing that I just realized that it's not a software issue, but a manufacturing one. If I turn the joystick to the right it stays in a position a little bit off center to the right. It doesn't jump back all the way to the center. The joystick is very sensitive. If you try it really carefully to just push it back from right to the center it will stop rotating. The joysticks slightly jumps to the right and stays there if you push it to right. It's really hard to see it, but you will if you pay attention. If I touch the joystick very carefully with the tip of my thumb and I push it to the left/up/down it jumps back to the center. Try to push it to right the same way and it wont jump back all the way. It's hard to see, you have to pay attention and look closer. Calibrating wont help. Just push it back from right to the center position and the gimbal will stop rotating. Also no issues with the joystick in the DJI App.
2020-12-13
Use props
djiuser_iCWmtDm49DJk
lvl.1

New Zealand
Offline

I thought I had damaged it in transit.

Has any one tried spraying some electro-clean into the base of the joystickm
1-24 17:34
Use props
Saggi_09
lvl.1

Canada
Offline

djiuser_iCWmtDm49DJk Posted at 1-24 17:34
I thought I had damaged it in transit.

Has any one tried spraying some electro-clean into the base of the joystickm

I also just now encountered this problem. Not sure what to do!
1-24 18:37
Use props
Manja
lvl.1

Austria
Offline

djiuser_24F6I4mgq4et Posted at 2020-12-13 08:07
I have the same issue with my Ronin RSC2. I tried everything and by doing that I just realized that it's not a software issue, but a manufacturing one. If I turn the joystick to the right it stays in a position a little bit off center to the right. It doesn't jump back all the way to the center. The joystick is very sensitive. If you try it really carefully to just push it back from right to the center it will stop rotating. The joysticks slightly jumps to the right and stays there if you push it to right. It's really hard to see it, but you will if you pay attention. If I touch the joystick very carefully with the tip of my thumb and I push it to the left/up/down it jumps back to the center. Try to push it to right the same way and it wont jump back all the way. It's hard to see, you have to pay attention and look closer. Calibrating wont help. Just push it back from right to the center position and the gimbal will stop rotating. Also no issues with the joystick in the DJI App.

Hello!I have the same mistake and can understand your description with the easy to move joystick. Have you already found a solution for this?
4-9 01:45
Use props
djiuser_YqVPVXRhfCPu
New

India
Offline

I have same problem with my dji ronim sc2
Please help me
4-14 07:24
Use props
Diamond Zero
lvl.1
Flight distance : 160440 ft
Switzerland
Offline

I had the same problem occuring right after my warranty expired. I contacted Dji and they told me I could send it in for repair. But I am not paying for anything, because it's not my fault. I can't use this Gimbal for filming, because it's not reliable anymore. It's really annoying, I can calibrate the joystick, but it starts drifting really fast when I slightly touch the joystick again. I don't know what to do.
5-24 22:48
Use props
Diamond Zero
lvl.1
Flight distance : 160440 ft
Switzerland
Offline

djiuser_24F6I4mgq4et Posted at 2020-12-13 08:07
I have the same issue with my Ronin RSC2. I tried everything and by doing that I just realized that it's not a software issue, but a manufacturing one. If I turn the joystick to the right it stays in a position a little bit off center to the right. It doesn't jump back all the way to the center. The joystick is very sensitive. If you try it really carefully to just push it back from right to the center it will stop rotating. The joysticks slightly jumps to the right and stays there if you push it to right. It's really hard to see it, but you will if you pay attention. If I touch the joystick very carefully with the tip of my thumb and I push it to the left/up/down it jumps back to the center. Try to push it to right the same way and it wont jump back all the way. It's hard to see, you have to pay attention and look closer. Calibrating wont help. Just push it back from right to the center position and the gimbal will stop rotating. Also no issues with the joystick in the DJI App.

Did you fix it somehow?
5-24 22:50
Use props
gwapoyus
lvl.1

Philippines
Offline

Had this error. What I did is turn on grip power button. Turn on gimbal power button. Try to calibrate but nothing happened just like attached image. Shutdown grip power button without turning off gimbal power button. Wait for 5 sec then start again grip power button and start gimbal button. And now I can auto calibrate it successfully just like attached image.
Screenshot_20210703_170131_com.dji.ronin.jpg
Screenshot_20210703_161414_com.dji.ronin.jpg
Screenshot_20210703_162945_com.dji.ronin.jpg
7-3 01:03
Use props
aramsun
lvl.1

United States
Offline

I am having the same issue. I Autotuned and Calibrated with the app and updated to the latest Firmware. Still the joystick is faulty, one touch and it drifts upwards nonstop. Changing modes or on/off does not fix it.
7-4 10:10
Use props
Sassaki
lvl.1

Brazil
Offline

Eduardo Romero Posted at 2020-1-28 17:17
Trigger
Press and hold to use the Lock Mode.
Tap twice to recentre the Ronin.

It worked here too
7-16 14:06
Use props
Pacinamac
lvl.1

Indonesia
Offline

Is there any other methods to auto tune the joystick? Four click doesn't do anything....
11-9 23:52
Use props
lizziam
lvl.1

Sweden
Offline

Hi!
I have a absolute new RSC2 and drifting upwards. Sending it in for replacement.
yesterday 11:39
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules