Please select Into the mobile phone version | Continue to access the computer ver.
Mavic Mini - Vector Skin Template
1234Next >
49533 126 2019-12-31
Uploading and Loding Picture ...(0/1)
o(^-^)o
jbrenes197
lvl.2
Flight distance : 87054 ft
Dominican Republic
Offline

you can just download the pdf its here in the post
2020-3-20
Use props
Corger
Second Officer
United States
Offline

I drew, scanned, colored, and printed a skin for my Mini.  The only problem is that the vinyl "paper" wrinkles along curved areas, especially around the battery cover.  Anyone have some tips?  Maybe heat?  Different printable vinyl?

I used this:  https://www.amazon.com/Printable ... dard/dp/B07ZV5KPKQ/

Wrinkled battery cover:
2020-3-22
Use props
jbrenes197
lvl.2
Flight distance : 87054 ft
Dominican Republic
Offline

make a small line cuts on the top crease overlap then overlap the two sides...if its vinil you can use a hot blower to ben it a bit...
2020-3-22
Use props
AirTrout
lvl.1
United States
Offline

why would i be blocked from downloading this pdf?
2020-3-22
Use props
jbrenes197
lvl.2
Flight distance : 87054 ft
Dominican Republic
Offline

AirTrout Posted at 3-22 12:06
why would i be blocked from downloading this pdf?

wut no...its a public PDF
2020-3-22
Use props
AirTrout
lvl.1
United States
Offline

jbrenes197 Posted at 3-22 12:13
wut no...its a public PDF

Its very frustrating Im a new user and i have verified my account via email they sent but can't download the pdf nor can I create a thread
2020-3-22
Use props
Corger
Second Officer
United States
Offline

jbrenes197 Posted at 3-22 09:46
make a small line cuts on the top crease overlap then overlap the two sides...if its vinil you can use a hot blower to ben it a bit...

I tried a hairdryer and it didn't work well with this vinyl.  I'll cut some slits and overlap it next time.  Thanks for the tip.
2020-3-22
Use props
Jele Wlk
New

Australia
Offline

Looks like a good template..
But there is no was I can download it. 'It says something like i wouldn't have the permossion....'
Could somebody please help me?
2020-4-13
Use props
djiuser_54OfVA8jvvIr
lvl.1
Flight distance : 653150 ft
United Kingdom
Offline

How do I get permission to download?

Thanks.
2020-4-19
Use props
djiuser_y7PcchTNkE3Z
New

Philippines
Offline

Where can i find a template tjat can cover the entire mini
2020-4-24
Use props
jbrenes197
lvl.2
Flight distance : 87054 ft
Dominican Republic
Offline

if you find one please post it here ;)
2020-4-24
Use props
zacks
lvl.1

Argentina
Offline

}Hello people, I am looking for this skin for the Mavic Mini to print, someone who knows how to do it and is generous?
2020-4-24
Use props
Labrone
lvl.1
Flight distance : 2572 ft
Italy
Offline

thanks is very good template
2020-4-25
Use props
jbrenes197
lvl.2
Flight distance : 87054 ft
Dominican Republic
Offline

This is an outside link to the Template
2020-4-26
Use props
zacks
lvl.1

Argentina
Offline



hello good morning, could you share the skin file you made? I like how it looks



zacks@hotmail.com.ar
2020-4-26
Use props
m80116
Captain
Flight distance : 3264131 ft
Italy
Offline

@zacks I used one of WAP GRADE accents skins for base... look at Amazon pictures you'll surely find many.

But I did just because it had minimal warpage (as I feel is a picture of a printed vinyl sheet). It would have taken me more the modify a vector template skin (available on this forum) rather then warping the image from WG, and anyway it turned out the only thing it needed was a scaling... I didn't warp it at all.
2020-4-26
Use props
zacks
lvl.1

Argentina
Offline

jbrenes197 Publicado en 1-7 16:18 Busqué en
Internet llegué a estas imágenes pero no las he probado en un entorno vectorial ...

[view_image][view_image][view_image][view_image][view_image]

HOLA PERSONAS
Tengo una pregunta, la piel tiene dos líneas, una celeste y una rosa. La rosa seria donde tenemos que dibujar, me imagino, y el azul claro, de lo que es. No sé si lo usan para pegar el adhesivo en el borde que quedaría o si lo cortan al ras con la pieza
2020-4-27
Use props
zacks
lvl.1

Argentina
Offline

zacks Posted at 4-27 21:01
HOLA PERSONAS
Tengo una pregunta, la piel tiene dos líneas, una celeste y una rosa. La rosa seria donde tenemos que dibujar, me imagino, y el azul claro, de lo que es. No sé si lo usan para pegar el adhesivo en el borde que quedaría o si lo cortan al ras con la pieza

HELLO PEOPLE
I have a question, the skin has two lines, a light blue and a pink. The serious rose where we have to draw, I imagine, and the light blue for what is it? I do not know if they use it to stick the adhesive on the edge that would be left or if they cut it flush with the part
2020-4-27
Use props
jbrenes197
lvl.2
Flight distance : 87054 ft
Dominican Republic
Offline

Blue line - Is the bleed edge this is where your print ends so if your printing patterns or photos end it at the blue line
Pink line - Is the cut line, where to cut the lines

La lÍnea Azul - Es donde llega el limite de la imagen o patron a imprimir para que pueda cubrir correctamente todo el corte
La línea rosada - Es donde corta la cuchilla.
2020-4-27
Use props
zacks
lvl.1

Argentina
Offline

jbrenes197 Posted at 4-27 22:08
Blue line - Is the bleed edge this is where your print ends so if your printing patterns or photos end it at the blue line
Pink line - Is the cut line, where to cut the lines

Thank you very much, I found the following skin images but they are not to scale and I am going crazy, maybe someone has them made to measure
2020-5-2
Use props
fans6ed6f5b5
lvl.1
Flight distance : 3238 ft
United States
Offline

Here is the skin I did.
2020-5-13
Use props
fans6ed6f5b5
lvl.1
Flight distance : 3238 ft
United States
Offline

djiuser_jyOsZUsTsuU9 Posted at 1-2 11:00
Can anyone please tell me the dimensions for the skin. It also won't let me download the file. Apparently I don't have permission to download it.

I took that file and made the length 5.38 inches top to bottom I did this proportional so everything worked out.
2020-5-13
Use props
fans6ed6f5b5
lvl.1
Flight distance : 3238 ft
United States
Offline

djiuser_jyOsZUsTsuU9 Posted at 1-2 11:00
Can anyone please tell me the dimensions for the skin. It also won't let me download the file. Apparently I don't have permission to download it.

I took that file and made the length 5.38 inches top to bottom I did this proportional so everything worked out.
17376.jpeg
17377.jpeg
17376.jpeg
17375.jpeg
2020-5-13
Use props
m80116
Captain
Flight distance : 3264131 ft
Italy
Offline

I think the best DYI template file lies here:

I've manged to print it on paper, stick the paper to a vinyl sheet, cut the pieces and stick them to my Mini with incredible ease (after some hairdryer moulding)... it's not a WAP GRADE skin but it's a darn good product distributed for free
Plus there's a better pay version if you want. If only I had a laser cutter I'd made one for each exit, sigh...

Here I post my worked version where I've conveniently laid down all the pieces in one A4 page and named all the parts, I also used the cutout line only (ideally must be cut in the middle) as the original file was a on pitch black background.
The .png file is correctly scaled for A4 (at 300dpi, just reduced colors), the original .svg file needs to be opened with a vector program (please note: only the .png file has part names). Beware some graphics program ignore the dpi setting and prints with his default. Use something suitable... I suspect GIMP might be the best option since it's free and I am pretty confident it retains the same dpi setting as Photoshop does.


DJI Mavic Mini Skin fix fox_cutout_A4_label_web.png

DJI Mavic Mini Skin fix fox_cutout_A4.rar

15.17 KB, Down times: 483

2020-5-13
Use props
Posstal
lvl.1

Ukraine
Offline

Hi? where i can find controller files to cut?
2020-5-16
Use props
m80116
Captain
Flight distance : 3264131 ft
Italy
Offline

See above and post #14

I've found the best scaling for my usage was 106.5% but... I haven't been precise, I just printed with the default dpi and it was considerably smaller, so I had to manually adjust, I avoided touching the dpi preset and acted directly with scaling in the printer driver.
2020-5-16
Use props
Sean-newbie
First Officer
Flight distance : 6053 ft
  • >>>
United Kingdom
Offline

2" orange insulation tape from B&Q works too! But I am only concerned about detering birds lol
2020-5-16
Use props
Posstal
lvl.1

Ukraine
Offline

m80116 Posted at 5-16 07:48
See above and post #14

I've found the best scaling for my usage was 106.5% but... I haven't been precise, I just printed with the default dpi and it was considerably smaller, so I had to manually adjust, I avoided touching the dpi preset and acted directly with scaling in the printer driver.

Thnks.  It not what i was looking for. In just small .png format. Not in proportion. Do you have .ai, ,svg or other vector?
2020-5-16
Use props
3Recon
First Officer
Flight distance : 4110404 ft
United States
Offline

Sean-newbie Posted at 5-16 09:09
2" orange insulation tape from B&Q works too! But I am only concerned about detering birds lol

They don't always miss
2020-5-16
Use props
Sean-newbie
First Officer
Flight distance : 6053 ft
  • >>>
United Kingdom
Offline

Those are the beep beeps that are pooping concrete on my car!
2020-5-16
Use props
djiuser_i04mppoUnE1Q
lvl.1

United States
Offline

Thanks new here with a new to me mini the wife has a Cricut and I want play with the skin how do I confirm more then I already have to get ability to download?
2020-5-16
Use props
djiuser_TFjA6KQzqtdb
lvl.1
Flight distance : 95912 ft
Turkey
Offline

m80116 Posted at 5-13 13:45
I think the best DYI template file lies here: https://www.youtube.com/watch?v=I4vxx7TRCGE

I've manged to print it on paper, stick the paper to a vinyl sheet, cut the pieces and stick them to my Mini with incredible ease (after some hairdryer moulding)... it's not a WAP GRADE skin but it's a darn good product distributed for free
[Image]

Thanks for the vector file man have a awesome time it's perfect
20200522_020745.jpg
20200522_020751.jpg
20200522_020808.jpg
20200522_020814.jpg
20200522_020822.jpg
20200522_020909.jpg
2020-5-24
Use props
LLAMPIE
lvl.3
Flight distance : 2563005 ft
Netherlands
Offline

I use a template that looks a lot like the wrapgrade. and add my own ideas to that

2020-5-29
Use props
piwii
New

Philippines
Offline

m80116 Posted at 5-13 13:45
I think the best DYI template file lies here: https://www.youtube.com/watch?v=I4vxx7TRCGE

I've manged to print it on paper, stick the paper to a vinyl sheet, cut the pieces and stick them to my Mini with incredible ease (after some hairdryer moulding)... it's not a WAP GRADE skin but it's a darn good product distributed for free

Hi Sir.... is it possible to share this zip file? im trying to download the file but it seems i dont have a permission..


Thanks in advance.
2020-6-3
Use props
Porktree
First Officer
Flight distance : 866690 ft
  • >>>
United States
Offline

What do you use for your cutter?  I'm looking at getting something and would like all of you recomendations.
2020-6-3
Use props
djiuser_ZTpEjY2jefdv
lvl.1
United Arab Emirates
Offline

jbrenes197 Posted at 1-7 16:18
I searching the internet i got to this pictures but I have not tested them in a vector environment....

[view_image][view_image][view_image][view_image][view_image]

Can you put the file , am not able to download.
2020-7-2
Use props
djiuser_QGddmxsL9j3A
New

United Kingdom
Offline

George GR Posted at 1-1 11:50
here

Thanks
2020-7-8
Use props
djiuser_hwk4McarTHR4
lvl.1
Flight distance : 139577 ft

Vietnam
Offline

Hi everyone, where can I download the skin file (with remote Skin) for mavic mini?
Or can you guys please send me at quachxinguyen@gmail.com
Thank you
2020-7-27
Use props
VanzPix
First Officer
Flight distance : 195187 ft
France
Offline

Hi, there is also this site that makes beautiful skin for all mavic for those who are interested.
https://www.decalgirl.com/
2020-7-27
Use props
djiuser_deTHwY7mk5CC
lvl.1

Mexico
Offline

GOOD JOB, VERY IMPRESSIVE
2020-7-27
Use props
1234Next >
Advanced
You need to log in before you can reply Login | Register now

Credit Rules