Please select Into the mobile phone version | Continue to access the computer ver.
Recording on SD Cards
1192 9 2020-1-22
Uploading and Loding Picture ...(0/1)
o(^-^)o
CYRBAE31
lvl.3
Flight distance : 640604 ft
France
Offline

Hi
Hope to have a clear answer to this question I am raising for the 3rd time

I have 2 SD Cards : one on the Smartcontroller one on the Mavic 2

Is there a selector / a switch / a configuration method to decide onto which one of the SD CARDS my media will be recorded ?

I have made a first flight : all the media (pics & videos) where on the SD CARD on the Smartcontroller Nothing on the SD CARD that was on board the Mavic 2

Can some one to give me a clear answer / process ?

Thanks
2020-1-22
Use props
DAFlys
Captain
Flight distance : 1283110 ft
United Kingdom
Offline

The smart controller only records a low quality version of the footage and all include any glitches caused by signal etc, the card in the Mavic will have the full res video/images.
2020-1-23
Use props
CYRBAE31
lvl.3
Flight distance : 640604 ft
France
Offline

DAFlys Posted at 1-23 01:26
The smart controller only records a low quality version of the footage and all include any glitches caused by signal etc, the card in the Mavic will have the full res video/images.

Ok thanks
But again is there a selector to decide to record in one SD CARD instead of another one ?
If there is a SD CARD only on the MAVIC and not on the Smartcontroller will it automatically rrecorrd on the MAVIC and vice versa ?
And again what happen when the 2 gears are mounted with an SD CARD ?
Is that possible to decide which one will record ?
2020-1-23
Use props
DAFlys
Captain
Flight distance : 1283110 ft
United Kingdom
Offline

CYRBAE31 Posted at 1-23 02:35
Ok thanks
But again is there a selector to decide to record in one SD CARD instead of another one ?
If there is a SD CARD only on the MAVIC and not on the Smartcontroller will it automatically rrecorrd on the MAVIC and vice versa ?

Its recording different things so you can switch between them.  
2020-1-23
Use props
CYRBAE31
lvl.3
Flight distance : 640604 ft
France
Offline

DAFlys Posted at 1-23 03:03
Its recording different things so you can switch between them.

Ok thanks
But how / where is the function to select / configure all this ? This is my question since the very beginning
Regards
2020-1-23
Use props
neilfisher
Second Officer
Flight distance : 385243 ft
Canada
Offline

CYRBAE31 Posted at 1-23 03:18
Ok thanks
But how / where is the function to select / configure all this ? This is my question since the very beginning
Regards

You're missing the point.

The MicroSD card on baord your Maic 2 Pro is the only card used to capture the full resolution, high bit rate video files.

The SD card in the Smart Controller only ever captures low resolution, low bit rate reference video files.

These two cards have such drastically different usages - there is no scenario where anyone should want to only record the low resolution, low bit rate reference video from the controller, and because of that there is NO means of switching which device and card is capturing video.

If you want lower quality video, simply change the recording format of the Mavic 2 Pro.
2020-1-23
Use props
DJI Gamora
Super Moderator

Offline

Hi, thank you for reaching out and we're sorry for the confusion. The SD card of the DJI Smart Controller only saves cache files or files that have a much lower resolution. On the other hand, the files that was saved on the SD card are the original files that have the full resolution. In addition to this, we don't have any capabilities to configure this storage location, either you wish to change and save the original files (files that was save on SD card) on your Smart Controller SD card or vice versa. You can only disable the cache file that was saved on the DJI Go 4 app, you may refer to the image below. Also, If the SD card on your DJI Mavic 2 Pro won't save any files even you have the cached files save on your SRC SD card, try to use a different SD card on your drone to see if the problem persists. Hope this will clarify your query to us. Thank you for your support!


2020-1-23
Use props
DAFlys
Captain
Flight distance : 1283110 ft
United Kingdom
Offline

CYRBAE31 Posted at 1-23 03:18
Ok thanks
But how / where is the function to select / configure all this ? This is my question since the very beginning
Regards

If you don't want to record onto the drone SD card don't press the record button,  if you don't want a cache of the video/photo turn off cache on the smart controller.  
2020-1-24
Use props
GPJeff
lvl.1

United States
Offline

I know this is an old thread. I think I know what he is talking about.

I have the DJI Mavic 2 zoom.

If I remove the sd card from the drone and insert it in to the computer, the recorded video and photo files do not show up in the windows menu from the sd card. There is a limited menu available, but the computer does recognize the sd card. When I connect the drone with USB C connection to the computer, the video and photos show up.
2020-12-6
Use props
kyalami
Second Officer
Flight distance : 8053983 ft
Sweden
Offline

Hi, I do not know if this helps, as I have the Go 4  remote controller. But in camera view in press the item to the right and below the record button. Its the one with 3 lines and round rings on each line. On the next screen that comes up I select the cog wheel at the top on the right hand side and the scroll down until I see select the SD card or internal storage. Here you can select where you want to record the full quality. If you select the SD card you get the one in the drone and if you select internal I get low resolution on my phone. The drone also have an internal storage, but it is not so large. I guess that you get it on the SD card in your remote controller and nothing on the SD card in the drone.
2020-12-7
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules