Please select Into the mobile phone version | Continue to access the computer ver.
Horizon not leveled - manual calibration
137 3 4-9 21:50
Uploading and Loding Picture ...(0/1)
o(^-^)o
Simo83
lvl.2
Flight distance : 72201 ft

Italy
Offline

Hello everyone!
EDF794D7-9BE7-4EB9-A0A2-D6E60A2C8A88.jpeg
4-9 21:50
Use props
Montfrooij
Captain
Flight distance : 1859961 ft
Netherlands
Offline

Did you re calibrate on a perfect flat surface?
4-10 01:13
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
Offline

Hi Simo83, as Montfrooij suggestioned, did you calibrate the gimbal on a perfectly flat surface? If yes, could you please place the Osmo Pocket on the flat surface and take a picture with an apparent reference object?
4-10 01:35
Use props
Simo83
lvl.2
Flight distance : 72201 ft

Italy
Offline

Hello my friends and thanks for your answers!

Despite the countless calibrations on a bubble table free from radio and / or magnetic interference (the use to calibrate the gyros of race drones), the horizon of my camera is always "tilted" by about an anti-clockwise degree.

Unfortunately, the calibration recommended by DJI does not affect the "bubble" of the gimbal...

To check what I say, just try to calibrate the pocket on a clearly inclined surface: you will still get a perfectly flat horizon (unless you have my same problem).

Unfortunately, I fear that the gyroscope seat is not parallel to the lens and therefore the sensor thinks it is "flat" when it is not, transmitting wrong cardanic information on its orientation -> wrong horizon.

Has anyone experienced the same problem and solved?
4-10 02:32
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules