Anyone else have an issue when using the DJI FPV radio transmitter connected via USB to flight simulators like liftoff, DRL, or velocidrone?  For me, and I think some others, if you push the sitcks to the edges of the gimbals, they "wrap" around to the other side.  Have a look at this video to get a better idea of what I am talking about.



Curious to know about others experiences and if anyone has found a fix for it.

Sorry for the trouble, I will confirm the issue with our engineers. BTW, the controller is working normally in actual flight, right?

DJI Thor Posted at 4-11 01:54
Sorry for the trouble, I will confirm the issue with our engineers. BTW, the controller is working normally while actual flight, right?

Correct, it works normally when flying for real.  

I was able to mostly fix my issue by going through the calibration steps in the "servo calibration" menu of the goggles and firmly pressing all the sticks to the end of their travel.

Now I only have the issue on the throttle if I push hard on the sticks.

reported already before in this forum just two weeks back!
https://forum.dji.com/forum.php?mod=viewthread&tid=211405

schl0r Posted at 4-11 13:18
reported already before in this forum just two weeks back!
https://forum.dji.com/forum.php?mod=viewthread&tid=211405

Thanks, not sure how I missed that post.

I was able to significantly reduce the issue I was having by running through the calibration process in the goggles.  I can still cause the sticks to wrap around, but it takes much more force.  For a full explanation and example, I made a new video.

This was just fixed in the latest firmware update.

mc54 Posted at 4-14 15:43
This was just fixed in the latest firmware update.

It does fix a problem with latency and the DJI radio, but it does not fix this problem where the sticks jump from one extreme of the travel to the other in a simulator.

Hi there, just an update for the issue, we will release a firmware to optimize the issue. Thank you for bringing this to our attention.

DJI Thor Posted at 4-23 01:58
Hi there, just an update for the issue, we will release a firmware to optimize the issue. Thank you for bringing this to our attention.

Has this problem been addressed yet through a firmware update?