Please select Into the mobile phone version | Continue to access the computer ver.
Dual Gimbal Issue?
300 3 4-11 21:10
Uploading and Loding Picture ...(0/1)
o(^-^)o
Lowlead
lvl.2
Flight distance : 1305791 ft
Canada
Offline

Good evening,

My M210 RTK V1 is having difficulty with postion 2 on the drone, I have an X5S on 1, and an XT2 on 2.  When I boot up Pilot, it detects the X5S on 1, but no indication for position 2.  If I enter the app, I have no camera control but the XT2 thermal is on the display.

Everything works normal if I only run one camera on 1, whether its the Z30, XT2, X4S, X5S.

Is this an app glitch, or a hardware issue?

Thank you,
4-11 21:10
Use props
EFRPIC
First Officer

United States
Offline

The XT-2 MUST be on Position #1 if you use two gimbals. It has to do with how the units processes teh dual data streams. It's not in the literature (at least not easily found).
4-12 21:09
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
Offline

Hi Lowlead, XT2 can only be mounted in Gimbal Connector I when using the Dual Downward Gimbals. Gimbal Connector II can be mounted with the Zenmuse XT and Z30 only. Please make sure to mount the gimbal in the required position. Dual Downward Gimbal.png
4-13 03:26
Use props
Lowlead
lvl.2
Flight distance : 1305791 ft
Canada
Offline

Perfect, thank you.  I was referring to the same page in the manual, and maybe just hoping that XT2 = XT as far as that was concerned.  All worked out now, thanks!
4-13 18:53
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules