Please select Into the mobile phone version | Continue to access the computer ver.
Pixhawk + E7000 Motors don't stop.
455 0 2020-4-13
Uploading and Loding Picture ...(0/1)
o(^-^)o
Juntae Park
lvl.1

South Korea
Offline

Hello, everyone.
I made the Hexacopter using DJI E7000 and pixhawk.
I found a fatal problem in my Hexacopter.


When some ESC connect with power, the motor starts to rotate at low rpm(lower than arming).
When you land after the flight, it also rotates at a low rpm(normal only when the motor stops).


The ESC LED color is..


- Motor that rotates on disarming after landing : green
- Motor stopped when disarming after landing: Red
- The other one: Rotate to the yellow/green blinking


This has never happened in E2000+pixhawk.


Can I solve the problem?

2020-4-13
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules