Hi,

Here's a snake camera view in the Combo case under the MM front and rear. We can see that there is no contact between bottom case and props. Same for the gear in the video #2.

Except,  there's again a friction between props see the other thread  (post 2 and 23)

https://forum.dji.com/forum.php? ... D712%26typeid%3D712   


(cam side)


(Battery side)

The tips of the props isn't where contact is made.  Please post a video showing props about 1-2 cm away from where they are screwed into motor and make sure MM is pressed down into case.

I had my first colonoscopy  last year...  did you at least medicate the Mini first??

Art Vandelay Posted at 4-22 07:52
The tips of the props isn't where contact is made.  Please post a video showing props about 1-2 cm away from where they are screwed into motor and make sure MM is pressed down into case.

The problem, I am almost certain, does not come from this part of the arm  (near the motors)  but, I will still recheck and make another video soon.

Akirasho Posted at 4-22 08:30
I had my first colonoscopy  last year...  did you at least medicate the Mini first??

Hi Akirasho,

Oups !  forgot   

Didn’t like the combo case so i use this one

Art Vandelay Posted at 4-22 07:52
The tips of the props isn't where contact is made.  Please post a video showing props about 1-2 cm away from where they are screwed into motor and make sure MM is pressed down into case.

Your question advances the problem of deformed propellers, Thanks

Here's the video - No contact from arms (motors) to the bottom of the box.

crash1sttime Posted at 4-22 09:01
Didn’t like the combo case so i use this one

Hi,

Very interesting, will check this beautifull case for sure.

Thanks !

JGFly Posted at 4-22 09:35
Your question advances the problem of deformed propellers, Thanks

Here's the video - No contact from arms (motors) to the bottom of the box.

Thanks for your videos... this supports the theory that if you're careful props will fall into their slot and not touch anything.

Trouble I feel is... when you lower the Mini into the Combo case props tend to get flapping around... and they might actually get caught between the lower body and bump designed to rest the Mini on.

m80116 Posted at 4-22 15:36
Thanks for your videos... this supports the theory that if you're careful props will fall into their slot and not touch anything.

Trouble I feel is... when you lower the Mini into the Combo case props tend to get flapping around... and they might actually get caught between the lower body and bump designed to rest the Mini on.

My pleasure !
That's why y decide to remove this bumb. https://forum.dji.com/forum.php? ... D712%26typeid%3D712

Thanks for sharing
Cheers !