Please select Into the mobile phone version | Continue to access the computer ver.
New Smart Controller Firmware Released (26/04/2020)
123Next >
12781 82 2020-4-26
Uploading and Loding Picture ...(0/1)
o(^-^)o
DJI Support
DJI team
Flight distance : 2408 ft

South Africa
Offline

Overview:
Date: 2020.04.26
Smart Controller Firmware: v01.00.0700
DJI GO 4 App: v4.3.36
DJI Pilot App: v1.7.2
DJI Assistant 2: DJI Assistant 2 For Mavic v2.0.10

What’s New?
  • Added support for Phantom 4 Pro v2.0. Under Aircraft Management, the Phantom 4 Pro v2.0 can now be added and managed.
  • Added ability to view HDMI live broadcast by connecting the goggles (v01.00.05.00 or above) to the DJI Smart Controller (v01.00.07.00 or above). By connecting the goggles to the DJI Smart Controller using USB-C cable, users can see the camera view of the air unit on the screen of the Smart Controller, and then can transmit the live view from the Smart Controller to other display devices through an HDMI cable.
  • Optimized the overall user experience of the Smart Controller

Notes:
  • To ensure optimal performance, it is recommended to update the Smart Controller to the latest firmware version.
  • Smart Controller with a firmware version of v01.00.4.75 or earlier must be updated using DJI Assistant 2. Download the latest DJI Assistant 2, and follow the steps in the System Update section in the DJI Smart Controller User Manual. Download DJI Assistant 2 at https://www.dji.com/en/mavic-2/info#downloads.
  • Contact DJI Support if the update fails several times.
  • Internet connection is required for SkyTalk.





2020-4-26
Use props
Nelsonlee
Captain
Flight distance : 2149252 ft
  • >>>
Malaysia
Offline

2020-4-26
Use props
DH_Pilot
Captain
Flight distance : 3082175 ft
  • >>>
Slovakia
Offline

Maybe hidden support for Mavic Air 2?
2020-4-26
Use props
Montfrooij
Captain
Flight distance : 2164990 ft
Netherlands
Offline

Thanks for the update!
2020-4-26
Use props
knarfboy
First Officer
Flight distance : 494508 ft
  • >>>
Germany
Offline

Good Job, support for Phantom Pro v2.0 !

https://www.kopter-support.de/viewtopic.php?f=54&t=3593
2020-4-26
Use props
Bimnomercy
Second Officer
Flight distance : 740390 ft

France
Offline

I've just done the upgrade without any problem, but still no french version of du UI's smart controller !!!
2020-4-26
Use props
djiuser_AvYBqZZ7NGz8
lvl.1

United States
Offline

Hi there. I just updated with this version and I noted that inside Settings\DJILab the third option is displayed in Chinese language. I have no clue what it is for. Fortunately is "off" by default. Does anyone know what it is for?
Thank you!
2020-4-26
Use props
raven swe
Captain
Flight distance : 517936 ft
Sweden
Offline

and its still on .32 go4 app, so where is this .36, your lucky my DJI Lab is missing now, all I have is Chinese letters that do nothing when clicked on.
2020-4-26
Use props
Mattbradders
lvl.1

United States
Offline

Keeps failing for me due to insufficient storage space error code 0x00
2020-4-26
Use props
raven swe
Captain
Flight distance : 517936 ft
Sweden
Offline

I done it with assistant 2, clear all you cache, take out memory card if you have one in there, off load all vids and pics or do a factory reset and give it a go. might be other things to try but that's all that comes to mind at the minute
2020-4-26
Use props
HereForTheBeer
Captain
Flight distance : 5381368 ft
  • >>>
United States
Offline


that's my thinking,1 day before new drone gets revealed and/or lunches they release a firmware update for the smart controller for a phantom 4 pro V2.0 and goggles which has been out before and could been added at anytime long ago?  i think hidden support for new drone being revealed tomorrow.


as a side note though, im prob not going to buy the mavic air 2 for a while, give it a couple months then jump on it after demand drops and major issues ge irond out.
2020-4-26
Use props
JohnDG
Captain
Flight distance : 721263 ft
Belgium
Offline

Updated to Smart Controller Firmware  v01.00.0700, but still on DJI GO 4 App: v4.3.32.  No trace of v4.3.36 on the SC, nor on the Google Play Store. Guess that for another time.
2020-4-26
Use props
dronespilot
Captain
Flight distance : 1392995 ft
  • >>>
United States
Offline

Updated with no problem here
2020-4-26
Use props
MauroT
First Officer
Flight distance : 2860299 ft
Italy
Offline

DH_Pilot Posted at 4-26 05:53
Maybe hidden support for Mavic Air 2?

maybe.... :-)
2020-4-27
Use props
MauroT
First Officer
Flight distance : 2860299 ft
Italy
Offline

dronespilot Posted at 4-26 22:12
Updated with no problem here

via wifi. ?
2020-4-27
Use props
sergeant
Captain
  • >>>
Sweden
Offline

Really excited to see this! Good work DJI!

2020-4-27
Use props
dronespilot
Captain
Flight distance : 1392995 ft
  • >>>
United States
Offline


Yes, as soon as I powered on the SC, the update notification popped up.
2020-4-27
Use props
Dronie2
Captain
Flight distance : 1336365 ft
Spain
Offline

Good news.
2020-4-27
Use props
MauroT
First Officer
Flight distance : 2860299 ft
Italy
Offline

how do you update the dji go 4?  thanks

(I notice that the recording with the microphone (screenrecording) is always in "under water" mode)
2020-4-27
Use props
DH_Pilot
Captain
Flight distance : 3082175 ft
  • >>>
Slovakia
Offline

Could somebody confirm if time shift issue when summer time is finally resolved in this firmware? Thanks.
2020-4-27
Use props
NotMyFault
lvl.2
Flight distance : 3013596 ft
Finland
Offline

So far so good, update went thru without problems.  
But I see that that fixing that 'additional hour' issue is there still.

Every time I switch SC on, it automatically add 1 hour.  I had forgot that issue because maybe during winter time it didn't do it.
But now in summer time, without wifi, every single time.
Would not prevent me flying, but it is annoying as sometime those time stamps are quite useful.

Also have notice this time to time.  Video taken between still shots is own time zone.  Even compared to SRT-file.
2020-4-27
Use props
DH_Pilot
Captain
Flight distance : 3082175 ft
  • >>>
Slovakia
Offline

@DJI, could you please finaly focus on time shift issue which is being reported in this forum for ages already? Thanks. David
2020-4-27
Use props
MauroT
First Officer
Flight distance : 2860299 ft
Italy
Offline

will it be compatible with mavic air 2 ? (who has the ocusync 2?)
2020-4-27
Use props
michimue88
First Officer
Flight distance : 436375 ft
Switzerland
Offline

done, without problems. all works fine
2020-4-27
Use props
raven swe
Captain
Flight distance : 517936 ft
Sweden
Offline

michimue88 Posted at 4-27 06:40
done, without problems. all works fine

My bad, DJI Labs is there and working ok, was looking at the bottom of settings for it when its not so far down,
2020-4-27
Use props
SenNel
lvl.1
United States
Offline

Update via wifi fails. It seem to install but doesn't take and tells me that an update is available immediately after it is finished. When I try to do it through DJI Assistant 2, it fails to find the smart controller when I turn it on. Tried on two different Windows 10 computers, uninstalled and re-installed DJI Assistant 2 on both computers and doesn't recognize it. Very frustrating.
2020-4-27
Use props
raven swe
Captain
Flight distance : 517936 ft
Sweden
Offline

you need to go look in device manager, then portable devices or whatever it says, then add m500 and your good to go
2020-4-27
Use props
SenNel
lvl.1
United States
Offline

raven swe Posted at 4-27 10:19
you need to go look in device manager, then portable devices or whatever it says, then add m500 and your good to go

Thanks for the suggestion. Just as I was finishing another attempt, I saw some window pop up about the SDcard I had in the controller and removed it. I'm trying again without the SD card in the controller and it appears to be downloading the update yet again. I suspect that may have been confusing where the update was supposed to install.

If it fails after this attempt, I'll try the m500 approach with the DJI assistant.
2020-4-27
Use props
SenNel
lvl.1
United States
Offline

raven swe Posted at 4-27 10:19
you need to go look in device manager, then portable devices or whatever it says, then add m500 and your good to go

Confirmed: make sure you remove any SD card from the controller itself before attempting the wifi-update. Otherwise, it will attempt to update the SD card as if it is the main storage and not update the controller itself.
2020-4-27
Use props
Buzzyone
Captain
Flight distance : 2417297 ft
  • >>>
United Kingdom
Offline


I updated one of my SC's over Wi-Fi, for some reason it wouldn't connect to Assistant 2. Its running Pilot but that shouldn't matter.

Depending on what version you are coming from has an Impact! I believe there was a bug in 0530 which required an update using Assistant 2 to get it to 0650, from 0650 to 0700 you would appear to be able to use Wi-Fi.
2020-4-27
Use props
Buzzyone
Captain
Flight distance : 2417297 ft
  • >>>
United Kingdom
Offline

JohnDG Posted at 4-26 21:20
Updated to Smart Controller Firmware  v01.00.0700, but still on DJI GO 4 App: v4.3.32.  No trace of v4.3.36 on the SC, nor on the Google Play Store. Guess that for another time.

Strange, mine updated to 4.3.36 with update 0700.

I am in the UK
2020-4-27
Use props
The Saint
Captain
Flight distance : 2584869 ft
  • >>>
United States
Offline

what is the hdmi update, i was hoping it would fix where i have an external monitor attached to the sc and i can see the full camera on the monitor and the full map on the sc.  still broken, eh?
2020-4-27
Use props
GlynH
Second Officer
Flight distance : 1672917 ft
  • >>>
United Kingdom
Offline

Buzzyone Posted at 4-27 13:06
Strange, mine updated to 4.3.36 with update 0700.

I am in the UK
You’re the lucky one!

I’m also in the UK, updated to the new v01.00.0700 firmware but no sign of 4.3.36 on my Smart Controller...I even looked in the ‘hidden’ place for the update check but it tells me I have the latest version installed at v4.3.32?

I really do appreciate the update but the long-standing issue that was there when I purchased my drone 15 months ago in January 2019 of not being able to logon to Livestream to YouTube is still there for me.

Facebook works but I stopped using FB back in 2016...

Also a couple of other issues I am seeing;

DJI Labs: 3rd entry is Chinese!

Remote Identification: Name doesn’t stick!

And I still can’t see a way of having the camera gimbal in ‘free’ mode when flying Waypoints. This for me would be the best thing about Waypoints with the aircraft taking care of the flying while I controlled the camera.

In fact Waypoints needs some love & enhancement IMHO to such a degree that I have been thinking about going over to Litchi.

-=Glyn
2020-4-27
Use props
JohnDG
Captain
Flight distance : 721263 ft
Belgium
Offline

Buzzyone Posted at 4-27 13:06
Strange, mine updated to 4.3.36 with update 0700.

I am in the UK

I did update couple hours after they released the new firmware. It is not the first time DJI make changes to the same firmware package without changing the number.
Maybe I'll try to do a refresh later of the same firmware.

Tried to update the Go4 app, but it keeps saying my 4.3.32 is the latest. No trace of 36 on the Google play store either as I tried updating it on my smartphone.
And DJI is still showing the 32 version on it's website.
2020-4-28
Use props
bjr981s
Captain
Flight distance : 129528 ft
  • >>>
Australia
Offline

MauroT Posted at 4-27 06:03
will it be compatible with mavic air 2 ? (who has the ocusync 2?)

The SC needs to support DJI Fly App to support Mavic Air 2.

Maybe this update will allow the FW to be able to load DJI Fly.
2020-4-28
Use props
FlyRacer
Second Officer
Flight distance : 89583 ft
  • >>>
Germany
Offline

bjr981s Posted at 4-28 02:59
The SC needs to support DJI Fly App to support Mavic Air 2.

Maybe this update will allow the FW to be able to load DJI Fly.

It is aleeady confirmed that the SC will be compatible
2020-4-28
Use props
JohnDG
Captain
Flight distance : 721263 ft
Belgium
Offline

FlyRacer Posted at 4-28 03:26
It is aleeady confirmed that the SC will be compatible

any references that it is confirmed ?
Didn't find much about it on the DJI website.

Technically, I think it is possible because it uses Ocusynch 2.0. It's just a software compatibility that is needed.
2020-4-28
Use props
JohnDG
Captain
Flight distance : 721263 ft
Belgium
Offline

JohnDG Posted at 4-28 04:21
any references that it is confirmed ?
Didn't find much about it on the DJI website.

seems to be on their fact page. Update in a future release. (Is that the one we just got ?)

https://www.dji.com/be/mavic-air-2/faq
2020-4-28
Use props
Cloudwalker
Second Officer
  • >>>
United States
Offline

Just updated via Assistant 2 and all went perfect. Took my Phantom 4 Pro V.2 for a test flight and all went great. Seems so much easier to control with the Smart Controller especially when panning. Great alternative to my Phantom controller and Crystal Sky. Thank you DJI! Now add the Air 2 to the Smart Controller and I will buy one.
2020-4-28
Use props
JohnDG
Captain
Flight distance : 721263 ft
Belgium
Offline

Cloudwalker Posted at 4-28 05:09
Just updated via Assistant 2 and all went perfect. Took my Phantom 4 Pro V.2 for a test flight and all went great. Seems so much easier to control with the Smart Controller especially when panning. Great alternative to my Phantom controller and Crystal Sky. Thank you DJI! Now add the Air 2 to the Smart Controller and I will buy one.

seems, DJI is planning to add the Mavic air 2 as they stated it already in the fact checks of the air 2

https://www.dji.com/be/mavic-air-2/faq
2020-4-28
Use props
123Next >
Advanced
You need to log in before you can reply Login | Register now

Credit Rules