Please select Into the mobile phone version | Continue to access the computer ver.
DJI Digital FPV System HDMI Output Tutorial
3024 6 4-26 18:50
Uploading and Loding Picture ...(0/1)
o(^-^)o
Jonatan.C.N
First Officer
Flight distance : 82238 ft
Offline

  
So it's finally there! After DJI Digital FPV System is updated to v01.00.05.00, HDMI output can be enabled when used with a DJI Smart Controller(01.00.0750.). You can follow the steps below to set up your system.
   0.png
  
Preparation before Use:
1. Separately connect the parts of the DJI Digital FPV System (Air Unit, Remote Controller, and DJI FPV Goggles) to a computer, run DJI Assistant 2 (DJI FPV series), and then update them all to v01.00.05.00.

Download link for DJI Assistant 2 (DJI FPV series): https://www.dji.com/cn/fpv/info#downloads
Connect the DJI Smart Controller to DJI Assistant 2 For Mavic, and then update it to v01.00.0750.
Download link for DJI Assistant 2 For Mavic: https://www.dji.com/cn/smart-controller/downloads
  
2. Make sure that the DJI FPV Goggles and Air Unit can receive signals as normal, and that the goggles can display image transmission pictures.
  
Connection Steps:
  • Connect the DJI FPV Goggles to the DJI Smart Controller with a USB-C cable. (The smaller connector of the cable connects to the Type-C port of the DJI FPV Goggles, and the larger one connects to the USB-A port of the DJI Smart Controller.) After properly connecting the DJI FPV Goggles to the DJI Smart Controller, open the FPV Live app, and the real-time image transmission pictures will be displayed on the DJI Smart Controller. 3.png 2.png
  • Then connect the DJI Smart Controller to a display screen (such as a monitor) with an HDMI cable, and the real-time image transmission pictures will be shown on the display screen.
   3.png
  
Note: After connecting the HDMI cable to the DJI Smart Controller, the screen of the DJI Smart Controller can be turned off by clicking the power button (this will not affect the HDMI output on the display screen). If a live broadcast lasts for a long time, the DJI Smart Controller can also be used while it is charging.
  
Precautions:
  • After switching the screen display ratio (between 4:3 and 16:9) in DJI FPV Goggles, it is necessary to unplug and reconnect the USB cable.
  • If the display screen is black and shows no picture, first check whether the DJI Smart Controller can display pictures as normal. If not, check the connection between the DJI FPV Goggles and DJI Smart Controller (by restarting the devices or reconnecting the USB-C cable). If the DJI Smart Controller shows pictures as normal, try to restart the app, and then plug the HDMI cable back in again.
  • If the app exits to the background and shows no picture after the USB cable or HDMI cable is pulled out and reconnected during use, try to restart the app and plug the USB cable and HDMI cable back in again. (Before restarting the app, it is recommended to unplug both the HDMI and USB cables first, and then individually plug the USB cable and the HDMI cable back in again).
  
4-26 18:50
Use props
Giammi
Captain
Flight distance : 847795 ft
Italy
Offline

I really hope they will find some solution to get HDMI out of the USB-C port. The solution you explained is not practical for me and doesn't work for those not owning a smart controller.
4-27 00:35
Use props
Pixels with ALT
lvl.2

Canada
Offline

Does it display AV video for those running the URUAV analogue mod?
4-27 06:21
Use props
Tangaroa
lvl.2
Chile
Offline

Congratulations!!!, great news for those who have Dji Smart  Controller. In my case, have a beautiful and expensive  Crystalsky, can you please tell me where can i find  the FPV Live app for my monitor, thank you very much in advance!!
4-27 21:35
Use props
Smarkus
lvl.2
Flight distance : 4245 ft
Finland
Offline

I've downloaded the latest version of DJI Assistant 2 For Mavic and there is no firmware v01.00.0750 available. What should I do? I have the goggles and really would like to try it out with my Mavic 2 Pro.
8-14 10:33
Use props
Vu Hoan
lvl.1

Vietnam
Offline

I hope the DJI FPV Goggles can connect to the DJI 4 Plus Pro the way Smart Controller does. Possible?
9-16 00:48
Use props
throneoffarming
lvl.1

South Korea
Offline

Why the hell didn't you make HDMI IN?

That's a feature that even goggles under 200$.
yesterday 00:15
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules