DJI,

What camera settings do I use when using the Mavic 2 Pro in the DJI pilot app for mapping?  If it’s a custom camera, since it’s not listed, please provide the data I need to create the custom camera.  Thank you!

Wow,  I didn't realise you could use the Mavic pro 2 with the Pilot app,  I'll have to give that a go.

Yes I use it on the smart controller

DJI,

I found the following information:

Sensor Size: 13.2 x 8.8mm
Max Photo Resolution:  5472 × 3648
Focal Length:  28mm

When I use this information as a custom camera in DJI Pilot it makes the mission go from needing 200 photos to over 2,500 - which clearly makes no sense.  

What settings do I use in DJI Pilot as a custom camera, for the Mavic 2 Pro, in the mapping section of the app?

DJI can you please respond?

Bump for response from DJI.  Please respond.

method007 Posted at 5-28 17:25
Bump for response from DJI.  Please respond.

DJI won't respond.

The 10.265 mm lens matches 35 mm film Equivalent focal length 28 mm

You have to enter the 'real' focal length: 10.265

COOTS Posted at 5-29 00:15
DJI won't respond.

The 10.265 mm lens matches 35 mm film Equivalent focal length 28 mm

Wow that appears to be exactly what the problem was.  Thank you very much for your help.  

wow.. a new app to use with the M2 Pro and Smart Controller. I've go to give it a try!

Heh, was just googling for it yesterday with no results and now found the answer was on first page of the forum)
I will give it a try!
I knew that the problem was somewhere in equivalents.

I just did it for Mavic 2 Zoom. The crop factor of an 1/2.3" sensor is 5.62.
The M2 Zoom has an 35mm equivalent focal length of 24mm zoomed all the way out. Same for the AIR.

24 / 5.62 = 4.27046263

I found a video that said to use the Mavic Pro Enterprise choice.  It warked great, but only saved DNG files with the GPD EXIF data.  I need the GPS EXIF data saved to JPEG format to be used with most of the mapping software out there.  I can't seem to find where to set that.  Any help woud be appreciated.