Dear all,
I just had a crash with my dji phantom 3 professional (Gimbal gone). Now I'm struggling with a Compass Calibration Error = strong magnetic field.

Done as explained in the guide (as it works before...) but nothing worked out well.  
Any good idea? Do I have to change components?

Btw. is there a possibility to read out the log-file?

Cheers,
Matthias

Aloha Matthias,

     Your best bet is to go to PhantomHelp.com

     There is more information there than you can use as well as a log reader.

     Hope this helps!  Take care and be safe!

Aloha and Drone On!

Sorry to hear about the crash, Matthias, it is recommended to send the damaged drone in for diagnosis and repair. Here is a link below for your reference.ONLINE REPAIR REQUEST

You had a crash and now can't recalibrate the compass?
That sounds a lot like you've broken a fine wire to the compass sensor (or the compass sensor connection to the mainboard is loose).
To confirm, check the Sensors section of the app Settings.
If it shows zero for the compass, your compass is disconnected.

Labroides Posted at 5-22 04:33
You had a crash and now can't recalibrate the compass?
That sounds a lot like you've broken a fine wire to the compass sensor (or the compass sensor connection to the mainboard is loose).
To confirm, check the Sensors section of the app Settings.

Sensors seem ok?
All values are changing while moving the drone...

tyuio Posted at 5-23 06:55
[view_image]
Sensors seem ok?
All values are changing while moving the drone...

tyuio Posted at 5-23 06:55
[view_image]
Sensors seem ok?
All values are changing while moving the drone...

Have you tried different locations?

ALABAMA Posted at 5-23 10:49
Have you tried different locations?

yes both inside and outside the building